Jump to content
SAU Community

Recommended Posts

I don't know anyone who has used one of these. Are you aware that you will have to change your dump pipe to suit the V-band configuration?

Not a bad setup otherwise.....nice and cheap too by the look of things.

Yeah dude i no that you got to change to vband but the dump is like under $200 so thats no biggie i just wanted to no if anyone out there nos cause i didnt want to pioneer the fiting of the turbo in queensland i no in NSW people are putting them on and getting results for a brush bearing turbo and Sam Cornell seems to be doing the work and tunning on these instalations.

Link to comment
https://www.sau.com.au/forums/topic/116578-kkr-480-turbo/#findComment-2144849
Share on other sites

Hi Im not actually in Queensland (Adelaide Actually). I had the boys at GT Autosound put a kkr 430 on my 96 33, It doesnt really lag and with boost being controlled by the wastegate 11psi I got my car dynoed at 202rwkw as soon as I get my power fc/injectors im gonna wind up the boost and should be able to pull 240rwks and if I change my AFM more.... all in all I was quite happy with it it was good replacement for my blown standard turbo.....

Link to comment
https://www.sau.com.au/forums/topic/116578-kkr-480-turbo/#findComment-2144916
Share on other sites

Hi Im not actually in Queensland (Adelaide Actually). I had the boys at GT Autosound put a kkr 430 on my 96 33, It doesnt really lag and with boost being controlled by the wastegate 11psi I got my car dynoed at 202rwkw as soon as I get my power fc/injectors im gonna wind up the boost and should be able to pull 240rwks and if I change my AFM more.... all in all I was quite happy with it it was good replacement for my blown standard turbo.....

Nice man what did they charge you for the fitting and tuning of the turbo it will give me an idea of what to expect. So what boost pressure will you have to run to get 240rwkw out of the kkr430 because it would have to be pushing the turbo pretty hard for that figue or are these turbos strong enough to take that abuse.

Im after about 250rwkw but i want the turbo to do it easy keep everything nice and efficent.

Link to comment
https://www.sau.com.au/forums/topic/116578-kkr-480-turbo/#findComment-2145836
Share on other sites

Nice man what did they charge you for the fitting and tuning of the turbo it will give me an idea of what to expect. So what boost pressure will you have to run to get 240rwkw out of the kkr430 because it would have to be pushing the turbo pretty hard for that figue or are these turbos strong enough to take that abuse.

Im after about 250rwkw but i want the turbo to do it easy keep everything nice and efficent.

They charged about $500 for the labour and even put some silicon hosing for me and I got it back the next day the biggest issue was the fuel and oil and water lines but I was told it was pretty easy in the end..... Im running 10 -11psi and pulling 202, at 11.5 it was 213 so Im sure if you have upgraded your fuel pump, have a power fc, AFM and injectors you should be able to pull 250rwkw at like 15-16psi these turbos are good for 20psi but obviously with the correct supporting mods. Im restricted atm by my injectors and AFM but was told from guys at tilbrooks that 250rwkw should be easily achievable with the correct supporting mods, hope this helps. My fuel consumption is about the same, lag isn't really an issue and the car sounds heaps more beefy all my friends tell me my car goes even harder and between 4-6k the turbo really boots! Hope this helps man!

Link to comment
https://www.sau.com.au/forums/topic/116578-kkr-480-turbo/#findComment-2146167
Share on other sites

They charged about $500 for the labour and even put some silicon hosing for me and I got it back the next day the biggest issue was the fuel and oil and water lines but I was told it was pretty easy in the end..... Im running 10 -11psi and pulling 202, at 11.5 it was 213 so Im sure if you have upgraded your fuel pump, have a power fc, AFM and injectors you should be able to pull 250rwkw at like 15-16psi these turbos are good for 20psi but obviously with the correct supporting mods. Im restricted atm by my injectors and AFM but was told from guys at tilbrooks that 250rwkw should be easily achievable with the correct supporting mods, hope this helps. My fuel consumption is about the same, lag isn't really an issue and the car sounds heaps more beefy all my friends tell me my car goes even harder and between 4-6k the turbo really boots! Hope this helps man!

yeah dude i think i will use the kkr480 turbo just so i got that bit of leeway on the turbo holding together side cause i dont like running things into the ground just for the sake of power but i guess the kkr430 would be able to make these fiqures but im still not sure the longenjevity of the turbo any way keep me informed of the progress and ill do the same ill do a full report when the turbo goes in with pics.

Link to comment
https://www.sau.com.au/forums/topic/116578-kkr-480-turbo/#findComment-2148984
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...