Jump to content
SAU Community

Recommended Posts

Flying Performance International is the only official online Hybrid dealer

Flying Performance International official website www.flyn.com.au

Check out the Hybrid official website at www.powerdigger.com

LOGO10.JPGflying%20banner2.JPG

logo%20top%205.JPG

04_1_b.JPGa3_1_b.JPG

Now, Flying Performance brings you the best ever deal you can find in this financial year, we are offering the 100% genuine Hybrid GT Spec intercooler kits for $650 delivered.

For this group buy, full payments need to be received before 26-05-06 and delivery will be made 01-06-06.

Check out all the photos of each kit at www.powerdigger.com.

Hybrid intercooler kit $650 delivered

New s13 / 180sx sr20det

New s13 / 180sx ca18det

s14 / s14a

s15

skyline r32 rb20det

skyline r32 rb25det

skyline r33 rb25det

skyline r34 rb25det

GC8 WRX

Supra Twin Turbo

Soarer Twin Turbo

Pulsar N14 GTiR

evo 4-6.5

evo 7 & 8

*All kit contains one latest Hybrid GT SPEC Tube & Fin Intercooler, all necessary brackets, screws & nuts, silicon hoses, aluminium piping and stainless steel racing clamps

*All piping kit comes with a step-by-step pictorial instruction for easy DIY installation

* 1 year manufacturer warranty

Payment Instruction

Postage & Handling = Free freight Australia wide, optional $40 freight insurance for possible loss or damage in transit

PAYMENT TO : FLYING PERFORMANCE INTERNATIONAL PTY LTD

ST. GEORGE BANK LIMITED

BRANCH NO. : 112-879

ACCOUNT NO. : 065766824

PLEASE you must give the bank your forum user name as the description of the transaction. That way it shows up on our bank statement with the amount you have sent us. So we can match your order with your payment otherwise there may be a delay for us to match the payment to your order!

After you have made the payment, please you must e-mail us with your payment date & amount, your name & postal details.

Once we receive your payment, we will inform you and send it at the same time.

It will be packed and sent securely in boxes or bubble padded bags for best protection.

Optional extra

93_1_b.JPG $49 Flying bov

4c_1_b.JPG $49 Flying boost controller

1b_1_b.JPG $29 Flying boost controller

5c_1_b.JPG $229 + $15 extra freight

29_1_b.JPG $88 HKS style oil cooler

b2_1_b.JPG $59 Flying steering wheel spacer

e7_1_b.JPG $49 Flying ground earth wire

e1_1_b.JPG $49 Flying engine start button

HSDlogo.gifHDS15HR.jpg

HSD Suspension

HSD coil-overs are used by 2005 Drift Australia champion Darren Appleton and many other prominent drivers in Australia. Now available only in the premium HR series, HSD coil-overs feature 55mm heavy-duty full-tapped dampers with 15-step damping adjustment. All models feature pillow-ball top mounts for easy installation and maximum control. Models with strut-type suspension also feature camber adjustment, while all models feature adjustable base height and spring seat height.

HSD coil-overs are supplied with spring rates intended for club-level motorsport, drift and street driving. Harder or softer springs are also available at just $100 a pair. All rates from 3kg/mm to 14kg/mm are kept in stock.

All HSD coil-overs come with a 12-month warranty against manufacturing defects.

NISSAN

S13 Silvia or 180SX $1549

S14 200SX $1549

S15 200SX or Silvia $1549

R32 Skyline GTS & GTS-t (GTS-4 available to order) $1549

R33 Skyline GTS25 and GTS25t $1549

R34 Skyline GT and GT-t $1549

R32 GT-R $1549

R33 GT-R $1549

R34 GT-R $1549

Z32 300ZX and Fairlady Z $1549

Z33 350Z $1549

TOYOTA

JZX90 Mark II, Cresta, Chaser $1549

JZX100 Mark II, Cresta, Chaser $1549

JZA70 Supra (Also GA-70, MA70, MA71) $1549

JZA80 Supra $1549

SXE10 Altezza and Lexus IS200 **NEW** $1549

SUBARU

GC8 Impreza WRX (MY94 to MY00) $1599

GDB Impreza WRX (MY01 to MY02) $1599

GDB Impreza WRX (MY04 on) $1599

SG5 Forester $1599

MAZDA

FC3S RX-7 (Series IV and V) $1549

FD3S RX-7 (Series VI to VIII) $1549

MITSUBISHI

CP9A Lancer Evolution (IV to VI) $1549

CT9A Lancer Evolution (VII on) $1549

HONDA

EG Civic $1549

EK Civic $1549

DC2 Integra $1549

DC5 Integra **NEW** $1599

AP1 S2000 $1549

thanks for your purchase

Payment Instruction

Postage & Handling = Free freight Australia wide, optional $40 freight insurance for possible loss or damage in transit

PAYMENT TO FLYING PERFORMANCE INTERNATIONAL PTY LTD

ST. GEORGE BANK LIMITED

BRANCH NO. 112-879

ACCOUNT NO. 065766824

PLEASE you must give the bank your forum user name as the description of the transaction. That way it shows up on our bank statement with the amount you have sent us. So we can match your order with your payment otherwise there may be a delay for us to match the payment to your order!

After you have made the payment, please you must e-mail us with your payment date & amount, your name & postal details.

Once we receive your payment, we will inform you and send it at the same time.

It will be packed and sent securely in boxes or bubble padded bags for best protection.

  • 2 weeks later...
  • 2 weeks later...

air%20filter%20ad.JPG

Latest SABER Stainless Steel Mesh Air Filter $35 each

Engine power is directly related to the airflow both coming in (Intake) and passing out (Exhaust) of the engine, factory intake systems are highly restrictive, so limiting engine power and torque. Saber Air Filter produces smoother and more even airflow with increased velocity for optimal air / fuel mixture. Installing our Saber Air Filter is one of the easiest and most inexpensive ways to increase engine response and better fuel efficiency.

* For both Turbo and NA cars

* Strong structure with 304 stainless steel mesh filter used

* 3" inlet with stainless steel racing clamp included

* Proven power gain for maximum performance

* It produces much louder intake sound and instant power gain

* Easy to maintain, fully washable & re-usable

* 2 sizes available : 16cm base width x 11.5cm height

12cm base width x 13.5cm height

Which kits are available? Is it only the red? or do you have the chrome in stock now?

cheers

Evil

The chrome Hybrid Skyline GT Spec kit is $650, but we are out of stcok for the chrome kit at the moment.

We have the red kit available for $549. That is $100 savings, the only difference is the colour.



  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...