Jump to content
SAU Community

Neo Rb25 Specs

brizzi

By brizzi,
in Engines & Forced Induction

 Share

Recommended Posts

brizzi Collaborator

brizzi

Posted
Posted

I have a neo rb25 in my r32 gtst. Bought it with it in already.The car was a bit rough in a few areas. First the exhaust was crap, so i put a 3'' under it highest flowed cat as possible.... :D Spit waste gate stainless dump pipe, already had a trust cooler on it. 450x300x100. Im running 8psi and it spun 205kw@ wheels.. How much boost can you run and torture these turbos?

I have done countless searches on the internet and have come up with a loss everytime....

Doe's anyone know where I can find specs?

Or doe's anyone have any that they wouldn't mind passing on?

I have to say I find the NEO 25 to be a completely different power compared to my old s1 25. It is alot smoother and seems to have alot more torque top end... :P

Link to comment
https://www.sau.com.au/forums/topic/118132-neo-rb25-specs/
Share on other sites
G_Force Community Regular

G_Force

Posted
Posted

My RB25 on my 34 runs up to 80kPa(~12psi) boost. Only power mods is a pod, everything else is factory std. Im a lil surprised too, either my stock boost gauge is out or ive got some factory freak that runs higher than normal boost. Ive read a no of threads on this topic n most seem to think a stock 34 should run 7-8psi boost max.

Im looking at getting a aftermarket boost gauge to confirm this before i start playing with boost.

Link to comment
https://www.sau.com.au/forums/topic/118132-neo-rb25-specs/#findComment-2175086
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...