Jump to content
SAU Community

Recommended Posts

Hi Guys,

im looking for a step by step guide to flushing coolant, re filling etc. the whole deal.

Did a search but cant find a guide.

I noticed the coolant bottle was empty and i heard if you dont know what coolant you used before, using another when you top up could create a jelly and clog you radiator.

anyone help??

Thanks.

you could empty your radiator, then fill with water mixed with a flushing agent, then drain and fill up as normal.

there is a drain plug on passenger side of the radiator, undo that (or the bottom hose)

fill the rad to the top with your water/coolant mix.

then start the car with the heater on.

let it run for a while and the coolant level will drop, keep filling it up as it drops...

once the car is up to temp. put the cap on the radiator, and then bleed the system further using the bleed point at the front of the plenum. 12mm bolt with a heta warning sticker.

open that and let the bubbles come out, once no more bubbles come out, tighten it up and away you go.

i should only use distilled water??

what flushing agent do i use??

which coolant do you all recommend? Nissan stuff?

distilled water = im on tank water so i dont have the nasties from normal tap water, so i would suggest yes if you can afford it

flushing agent = is like a nulon or something (small bottle like octane booster injector cleaner etc) ... you dont have to do this. if you look in the radiator cap and see lots of rusty coloured gunk. either use a high pressure hose, or pay a radiator place to flush the radiator (if temps are an issue this would be recommended)

coolant = i run the green Nulon concentrate, running to about 30% mix . note the more coolant you use the less heat transfer the fluid has, but higher boiling point.. so more does not mean it will cool better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...