Jump to content
SAU Community

Recommended Posts

1996 R33 GTS25T S2

76000KM

SILVER

SUNROOF

FACTORY CD PLAYER

MODIFICATIONS INCLUDE:

17" AVS RIMS

3" FUJITSUBO EXHAUST

3" FRONT AND DUMP PIPE

BLITZ POD

WALBRO FUEL PUMP

SERIES 4000 ROTORS

BENDIX ULTIMATE PADS

GREDDY PROFEC B SPEC 2 BOOST CONTROLLER

APEXI PFC WITH HC

550CC JECS INJECTORS

SARD RISING RATE FUEL PRESSURE REG

HYBRID GT SPEC FRONT MOUNT

XTR HIGH FLOW TURBO RATED 450HP

TURBO TIMER

ENGINE MODIFICATIONS:

FRESH REBUILD WITH......

20 THOU ACL RACING PISTONS

ACL RINGS

ACL GUDGEON PINS AND CLIPS

RB26 MAINS

RB26 BIG ENDS

NEW REAR MAIN SEAL

NEW CRANK SEAL

NEW CAM SEALS

BLOCK DECKED AND HONED

CRACKTESTED

CRANK BALANCED

1.4MM HEAD GASKET

ALL GASKETS REPLACED

NEW TIMING BELT

NEW WATER PUMP

NEW HEAD BOLTS

HEAD MILLED

LIGHT PORT

NEW VALVE STEM SEALS

LIFTERS CHECKED ALL OK

THIS ENGINE HAS JUST BEEN REBUILT AND IS STILL BEING RUN IN.

IT CURRENTLY HAS 48KM SINCE THE BUILD

THIS CAR BEFORE THE ENGINE REBUILD HAD 248.3RWKW WITH DYNO PAPERS TO PROVE

THE CAR WAS TUNED BY TIM AT ELECTRONIC AUTOMOTIVE IN EPPING

IT WAS PURCHASED FROM JSA IN PRESTON AND I AM THE FIRST AUSTRALIAN OWNER.

THIS CAR HAS HAD SO MUCH MONEY SPENT ON IT SINCE I OWNED IT. I HAVE LOST COUNT OF THE AMOUNT I HAVE SPEND BUT AFTER THE REBUILD IT WOULD BE NEAR ON 13K.

THIS CAR COMES WITH 2 1/2 YEARS WARANTY STILL LEFT WHICH IS TRANSFERABLE.

$19500 ONO

IF AN INTERSTATE PERSON BUYS THIS VEHICLE I WILL GO HALVES IN THE COST OF TRANSPORTING IT DOWN.

PICS CAN BE SEEN ON THIS WEBSITE: http://www.boostcruising.com/forums/index....howtopic=138757

PHONE JAY

0409204820

Link to comment
https://www.sau.com.au/forums/topic/118701-fs-33-gts25t-s2-or-consider-swap/
Share on other sites

argh...... ive stopped typing in caps. (geee)

anyway..... price droped. have just purchased a new car so now this one need to go.

updated 26/5/06

new car is on its way.

$19500 ono. (open to resionable offers, nothing stupid guys, be realistic and serious)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...