Jump to content
SAU Community

Recommended Posts

Hi guys i thought i would start a new thread on the resuts from compact attack.

I was able to run a new PB in my mates little civic with a 11.41@134mph.

i didn't get to see much how did everyone else go?

Cheers

thats a awesome effort!!! could you provide some more details about this 134mph beast...eg motor type, inducted?, tyres, box etc thanks mate.

The car is a 98 model civic with the following

B16A still 1.6L

modiffied 35/40 with lager 66mm inducer, larger comp cover and the 1.06 exhaust housing

Hypertune big bore runner exhaust manifold made from stainless

Toda valve train

OS giken bottom end

stock crank

spoon diff

os clutch

motec m800

motec cdi

bfgoodrich 225/50/15

90mm intercooler

10psi=1st

15psi=2nd

21psi=3rd

21psi=4th

We will now start winding up the boost a little in 3rd and 4th.

Its was great seeing Theo run a flat 9 in his GTR.

134 eh? That's certainly stomping in the deep end of the track.

I drove over from Adelaide for the event and had a ball.

I had a moment when the plenum ruptured with a 6-inch crack along a weld, but we recovered by smearing it with epoxy, covering it with gaffa tape and then wrapping the plenum with 3 ratchet straps. It then went on to record a PB during a solo run, [email protected], and was on the limiter for the last 60m.

To make the weekend better, I then ended up i the final (bit of a Stephen Bradbury actually-but I'm not compaining) and won Compact extreme from a pro looking VW drag car.

In the end it was worth the 2800km round trip. :(

Cheers

Sean

BS, Benm, I am sure I saw you sneak in a couple of dogs during one of the breaks :sweat:

Well done to the little Civic, that is a very impressive time. Some more traction and a completely legal car will see it take the record next season.

Excellent event, can't wait for next season. Hopefully will be competing with one of my two projects :)

Hey Sean (MS-75), your car is pretty damn nice, the pics of it don't do it justice. In the flesh it's a neat hotrod, and quick too.

i agree. im disapointed i never got a close look at it in the pits. its a very deceiving car to watch race it seems to drive off so steady from the line but storms to the finish.

Thanks guys-it's been a long journey to get this far, but it's all coming together. There is still probably around 1 sec's inprovement to be had before I need to open the motor up and actually change it away from std.

I haven't done ANY work on getting it to launch yet, so even on the 10.2 it still crawled out of the hole in 1.80. In addition, it's suffering from boost induced valve float with the stock springs and 22psi (we only identified the problem 2 weeks out and so didn't have time to change thembefore the meet.) With any luck, by Jamboree It should have over 500rwkw and be launching properly.

My one regret about the meet was that due to competing I didn't get time to take in any of the other cars that were running.

Man WSID is an awesome facility

Bring on Jamboree. :)

Cheers

Sean

Just giving you an update on whats going on.

We will be hitting the track we hope next week in trying for a ten or maybe just getting the car comfortable with more boost for now.

as i have said before we will be uping the boost from 21psi in third and forth and maybe dropping it a little in second.

Just making sure eveyone knows these times arn't with our GTR, but with a 1.6L turbo civic.

We are also looking for a quote on getting a papachute fitted and getting a cage put in if anyone has anyone they know that would help.

I'll keep you up to date with how we go with power.

Also Hypertune will be making one of there Billet plenums for the B16A/B18 very shortly so , we will run one of those as well as a 76 or 85mm TB on it.

Just giving you an update on whats going on.

We will be hitting the track we hope next week in trying for a ten or maybe just getting the car comfortable with more boost for now.

as i have said before we will be uping the boost from 21psi in third and forth and maybe dropping it a little in second.

Just making sure eveyone knows these times arn't with our GTR, but with a 1.6L turbo civic.

We are also looking for a quote on getting a papachute fitted and getting a cage put in if anyone has anyone they know that would help.

I'll keep you up to date with how we go with power.

Also Hypertune will be making one of there Billet plenums for the B16A/B18 very shortly so , we will run one of those as well as a 76 or 85mm TB on it.

is this illiers car?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...