Jump to content
SAU Community

Recommended Posts

True Story.........

About 2 years ago me and a mate was emailed about a business oppertunity. this company was offering us 10% to help them clear some funds that were theirs but due to international sactions couldn't release it. we opened 5 bank accounts at 5 different banks and then they proceded to transfer funds. they put in over US$500,000 into the 5 accounts, they asked us to now tranfer these along while keeping our 10%. we were ment to do it the same day but we decide to keep the money for our selves (he he he we knew it was a scam from the get go) but the next day we had federal police contact us about the funds, Ha ha ha they took 4 accounts but missed one with about 150G in it. we got off scot free, all we had to do is give them all the emails and paper work, he he he we still have the money but are pretty sure that the CID are still watching us so we're to scared to spend it.

he he he

:(

True Story.........

About 2 years ago me and a mate was emailed about a business oppertunity. this company was offering us 10% to help them clear some funds that were theirs but due to international sactions couldn't release it. we opened 5 bank accounts at 5 different banks and then they proceded to transfer funds. they put in over US$500,000 into the 5 accounts, they asked us to now tranfer these along while keeping our 10%. we were ment to do it the same day but we decide to keep the money for our selves (he he he we knew it was a scam from the get go) but the next day we had federal police contact us about the funds, Ha ha ha they took 4 accounts but missed one with about 150G in it. we got off scot free, all we had to do is give them all the emails and paper work, he he he we still have the money but are pretty sure that the CID are still watching us so we're to scared to spend it.

he he he

:(

account details and pin number please??

;):);)

True Story.........

About 2 years ago me and a mate was emailed about a business oppertunity. this company was offering us 10% to help them clear some funds that were theirs but due to international sactions couldn't release it. we opened 5 bank accounts at 5 different banks and then they proceded to transfer funds. they put in over US$500,000 into the 5 accounts, they asked us to now tranfer these along while keeping our 10%. we were ment to do it the same day but we decide to keep the money for our selves (he he he we knew it was a scam from the get go) but the next day we had federal police contact us about the funds, Ha ha ha they took 4 accounts but missed one with about 150G in it. we got off scot free, all we had to do is give them all the emails and paper work, he he he we still have the money but are pretty sure that the CID are still watching us so we're to scared to spend it.

he he he

:(

hehehe......im willing to forget i saw that story for 20k

I'm pretty sure since it was such a huge amount that the CID is just baiting us....

prolly wont eva touch the money unless in a dire situation, and me and my friend are ready to face consequences.

:(

u could always outsource that money lee, u know, get to know a bank worker quite well

is it making interest at all? what u could possible do, is just spend that interest, caus u mite be able tog et away with that

u could always outsource that money lee, u know, get to know a bank worker quite well

is it making interest at all? what u could possible do, is just spend that interest, caus u mite be able tog et away with that

no intrest with out a deposit, but no bank fees if i keep the balnce above like 5000

he he he

I have this gut feeling that if anyone touches that money their gonna get busted.

no intrest with out a deposit, but no bank fees if i keep the balnce above like 5000

he he he

I have this gut feeling that if anyone touches that money their gonna get busted.

find a mega good hacker to transfer it from your account to some other account of some1 else's without a trace.

im not happy. answer me this any1,

how long does it take for a professional to change front and rear camber bushes??

bcoz i dropped my car off at 8am this morning and they ring me at 3pm saying that my car wont be read and could i leave it there over night.... im sus they might have f**ked something and are trying to fix it without me knowing....

they did the good old claim the apprentice was on it and has taken alot longer than first thought, and has only got it half done..

my theories are they started really late today or they stuffed something and have to wait for parts...

what do you guys think??

i'd say they havent even started yet, u got a firm quote from them before u got them to start? caus id be careful they might charge u a sheitload caus how long its taken

no il tell them to get f**ked and take my car.

im not paying any more than a couple of hours for the labour, its not my fault that there apprentice maybe took on a job that was beyond his capabilities, and u think if they saw the apprentice having troubles with it they would pitch in a give him a hand to get it doen before the customer was due to pick it up....

anyway i guess ilfind out 2moro. :P

hmm i hate it when they keep ya car.. i took my car for a service. normal regular service, and they kept it over night claiming they werre waiting on a part...

then when i picked up the car the next afternoon, my lense over the dash was split, and they hadnt even mentioned it ( i found out 2 hours later after my dad had picked me up)

i called up the next day and he said they simply forgot to mention it to my dad....

4 months later (and after weekly calls from me) the replacement part came in adn was fitted for free.

my familys 5 cars now got else where.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...