Jump to content
SAU Community

Recommended Posts

dsajgasdofgjsdaflj

dsjlfkjasdgbfkjasgbdv

sdjlfgvbjkasdgvbjkbasdkvjb

sdjlgvbjksadgvbjkvbasd;b

ldjkasfvjklasdgbfuogsldjfvjlasdgvb

sdljkvjklasdgbvjkbsdjkvbkjsbdvjlb

sdjvbsadjkbvuiowerobusdiobavkjblkasjdbv

sdjklvbjasdbv;jbsadjvkbisuadbvjkasdbv

sadjklgvbjkasdgbvuiwgberiovbjkl;asdbv

sadjlvbkjsdgbvo[asuidfvihdsavnlask;vb

sdkl;vboiasufiweiofvnionrfhweigvbo

dnspifbhiowncvwioernfionwdifnviowe

ewiopfhiowehfwhneiofhnikfgov

,dvncc,.zxvnm,whaerioqeoi[tgds

gasdrt09273405toihfgba9u8htw

wio0v8734gfb5u4gnkonasdff789awh

asdf90828345tgu3gjivb807agh8 r7h

hrw9t78q49785tqiohasbdv78art34uijkwfe98goui

w89e4ghfoiasldkhfkasdhfaisdurtklawhef90ae749nkldfyhasdifhldkahlkdhlkdhfkla

l;kasdhfiowehfklashdfioehwoihflkasdhfuiowegroiw;'efjklskldhf

.,cbnvmzbm,.bcvbouibwjbfvvuoisdahgowei

hsdklbvmbweiobvouwbav,mboixcugvbwuiora

sadbovkbiwoervbobsdavmbm,bcvoiborwie

dsklbfmbweqiofubojklewgbfu8iower8ru

asdiofhoeiqwykwblembfbvc,.CBMZXUIOra;gbvoabv

saljkfm,wbefjuiwbjbgv,mbxajkfg982yrlkghrflkbasdfbas

adsoryoqweyrklhdflkhasdklfhjasdhfjkhdsjkfhjksadfhkjsdhfjkl

asdjklfgeioyrhdsahfuiwerjvbkw89rioriorioriorioriorioriorioriorioriorioeu]

kyugibjktjktjrtol

jhdjcpfsdagjioprwejhgnsfpahnvipohwg

slajlsjdkjklas;dfjiehfkhdga

Ekljsdfgioashtkrheaishivblkbn.anv

asldhfherw90fgihrweinv,nsda,.nvkldhfoiwer

asdhfgkansdnvklasdhioyhiohwrietklhasdg

asldhfkhaiosdhfouiwervbjkbmzxc,bvuioptasipdyhfkl;hasf

asl;dhfiopweyrto0weyirhklhdhfkldfkljdsfkl;ythhe thets the

the eht eht ejrtkretjiayfuvbjqwotuewtyjdkj;sdklfuioehlkfsdgh

asdklhfioeyrkldshfdljkashfdjfkj;kldjsfkl;sdjatkudkl;shfdksvbklk;d

sdkhhfklasdhiroheqwl;khfklsdbhamvdhsrlkhwioefhlksdbhvlbkas

sadkfhiowerhfiowq hfihkldhfklh khdfkhdsnvuwgu8egrtqwoeiyirdaksf

weoryhi9pyr9082yriehkcklneiovh8w9gh4irkelbfkbsdafuipq4rgb

eoghiorqeyr9023rknelmf nqweoiurhf2890h34rf khfkldnfklwbeioryh20[r

ewrhqweyhrioh;fkh;ldisrfyhqwegrtf3q4nionrklewnfio

As you can Plainly See, I AM FARKING BORED!!!!

man i think i'm gonna have to go srew one of the girls here at work far there is this Kiwi Girl with the nicest ass and a great rack... i wonder if sahe's ever done porn like the other Kiwi Temp?

bahahah have u upset linh again lee? :pirate:

nah she's in Vietnam with her mum.....

it aint cheating right if SHE's in another country right? :)

bawahahahhahahaha

and we were payin on out shane for havin ghey times with lee yesterday.

but i think shane would now perfer the 14yr old over u lee

you were talking about me :P

but y dont we just make it a :no:

nah id be worried about john being gay, caus all he could talk about yesterday was gays, and accusing people of being gay. it's okay john, u can come out of that closet if u want, and im sure lee would be gentle with u :)

thats right lee, how long do u have to go out for? and i think she'll be walkin a bit funny for a few days when she gets back :no:

nah id be worried about john being gay, caus all he could talk about yesterday was gays, and accusing people of being gay. it's okay john, u can come out of that closet if u want, and im sure lee would be gentle with u :pirate:

thats right lee, how long do u have to go out for? and i think she'll be walkin a bit funny for a few days when she gets back :P

Walking??? ha ha ha she wont have the energy!!! :)

Gentel with John :P Break out the Whips and Chains!!! Oh dont forget the Saddel!!!! :no:

MMmmmm.... Skinny Little White Boys FTW!!!

ha ha ha

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...