Jump to content
SAU Community

Recommended Posts

THIS Anna is going with you to check out the brakes for the 32 :P

It looks gold! Same guys that did Sean of the Dead.

i was talking about the OTHER anna lol

omg i get to be blessed with ur company!!!

What do you want, lip roll, blended fiber glass flare? full metal/guard pull like the below:

LXU55-NewPaint009.jpg

Yeah they have to be rolled properly yet...and flared, prob not blended/curved as they are there, just a straight heat and bend the top out. It may need a fibre glass flare on it i dont know yet.

Yeah they have to be rolled properly yet...and flared, prob not blended/curved as they are there, just a straight heat and bend the top out. It may need a fibre glass flare on it i dont know yet.

Mine are metal, blended with a hammer and dolly lol, these one's i'll stick with.

I've had about 6 different flares on the rear, I just keep changing the angle and shape this time i wanted no filler/glass. I gues syou need to clear wheels? Do you just want a little "drift" lip to hang rim?

i was talking about the OTHER anna lol

omg i get to be blessed with ur company!!!

sure do bish. Are you coming straight to my place after you finish work.

OMG now im watching chocolate

OMG I love that movie. It's a pretty girly movie, what made you pick that one?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...