Jump to content
SAU Community

Recommended Posts

18psi yes he did tell me, but i was pretty unorganised no tyre pressure guage. They were at 36psi. :yes:

Axle tramp, :O f**k all the way til half track.

\

Not sure what model tiens, but when i find the knob which way do i turn it and where is the knob, not this one on the keyboard either, lol. :laughing-smiley-014:

u farktard, no wonder u only managed a 13.4 :D

axle tramp = f**ked shocks &/or worn bushes

next time ur out give me a yell and i'll set her up as best as possible! (i know ull be back out, the bugs bitten hard i bet :P)

u farktard, no wonder u only managed a 13.4 :D

axle tramp = f**ked shocks &/or worn bushes

next time ur out give me a yell and i'll set her up as best as possible! (i know ull be back out, the bugs bitten hard i bet :P)

Farktard yes i am :yes: .

The bug has crawel up my arse :O .

Shocks should be good, bushes maybe.

The suspension and ride of the car is hard as a rock.

hmm ok

couple of thoughts

reduce axle tramp need to:

a) soften damper settings on shocks

b) revalve shocks to a more sophisticated setup, the teins are known as being a poorly designed valving system

c)put a softer spring in the rear and revalve the shock as needed

d) replace subframe bushes

e) add suspension goodies to rear end to aid in squat/traction

finally, give the keys to me to run a 10 :yes:

hmm ok

couple of thoughts

reduce axle tramp need to:

a) soften damper settings on shocks

b) revalve shocks to a more sophisticated setup, the teins are known as being a poorly designed valving system

c)put a softer spring in the rear and revalve the shock as needed

d) replace subframe bushes

e) add suspension goodies to rear end to aid in squat/traction

finally, give the keys to me to run a 10 :yes:

not soo much as poorly designed as the rebound, rate tends to be alot stiffer than say HKS drags.

teins support more of the drift/circuit with harder suspension none of this soft short straight line crap lol... :sorcerer:

jokes...

lol shaney poo.. u drive that ull break it like the others..

hmm ok

couple of thoughts

reduce axle tramp need to:

a) soften damper settings on shocks

b) revalve shocks to a more sophisticated setup, the teins are known as being a poorly designed valving system

c)put a softer spring in the rear and revalve the shock as needed

d) replace subframe bushes

e) add suspension goodies to rear end to aid in squat/traction

finally, give the keys to me to run a 10 :mellow:

I will give you the tyre pressure to hold for me, but no keys BUDDIE. :P

So where are these dials at the base or at the top of the shock.

I will give you the tyre pressure to hold for me, but no keys BUDDIE. :D

So where are these dials at the base or at the top of the shock.

There are no "dials" on teins. There will be a round, small knob that turns.

Look at the top of the coilovers, is there a knob that turns? If so refer to what I told you a page back to adjust the damper. If you see no knobs that turns, you don't have have damper adjust teins.

not soo much as poorly designed as the rebound, rate tends to be alot stiffer than say HKS drags.

teins support more of the drift/circuit with harder suspension none of this soft short straight line crap lol... :sorcerer:

jokes...

lol shaney poo.. u drive that ull break it like the others..

go read what sk and the other guru's have to say about the teins

I will give you the tyre pressure to hold for me, but no keys BUDDIE. :D

So where are these dials at the base or at the top of the shock.

hahaha spose i could do that for ya :)

go read what sk and the other guru's have to say about the teins

This is true, althought SK really only rates bilsteins, more so his ones... We have some what adjustable bilsteins in the Porsche and even thought I rate them, I wouldnt jump out and buy a set.

Same goes for a set in a skyline I have driven, nice basic firm set up for street and the odd club day, other then that why brother...

I share everyones opinion on Teins, although I rate them high for drift, and drift only.

i too rate them for drift.. i like coilovers.. what u guys think of JIC..? or HKS hypermax..?

also my coilovers DNT have the adjuster.. but HD or HR HA whatever its called does. the rears should be a knob. like the pedders and bilsteins and the nismo Stunes

anyway i like stiff ride.. i like a HARD STIFF RIDE...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...