Jump to content
SAU Community

Recommended Posts

just found out a previous client of mine is using a logo design i was working on for her she rejected the design and told me to stop all work i was doing for her business because it was taking too long to get what she wanted

she is using the design I did with a slight change to one of the elements as far as i know i can screw her for this - she aint gonna be happy when i turn up with a bill!!

So Transport are trying to take my license back off me as they f**ked up, yeap they f**ked up. They worked out they gave me my opens inside the 3 year window haha, PLUS ontop of that they didnt add on the extra suspension times on my P's. Now they wana put me on a suspensed license or a 1 year thing, but im like you cant offer me that, Ive only lost 9 points out of 12. I have 3 left, its your problem u f**ked up, plus i'm well into me having my opens, you cant just go back in time haha

RTA suck :(

ROFLCOPTER NO MORE PORSHE MIDNIGHT RUNS

Hey shane bish, Wheres my flame pics. :D

i can make some good flaming GTST material if u want.

u wouldnt fit, shes 14....

interesting.. :worship:

just found out a previous client of mine is using a logo design i was working on for her she rejected the design and told me to stop all work i was doing for her business because it was taking too long to get what she wanted

she is using the design I did with a slight change to one of the elements as far as i know i can screw her for this - she aint gonna be happy when i turn up with a bill!!

bill her ass

my mate put a T3 33 GTST turbo on his 1.5L na honda.. then he just put a Vtec head on. and i just did his timing belts and stuff..

weird thing was. i put it in gear got someone on foot brakes to lock the driveline and still getting the crank to spin..???

hmm went to drift practice to watch ARE31 is doin really well and same with DRFT R33 GTST.

i wish i was out ther. time to get my car runnign again. lol

maybe if it wasnt a defected pos ud be a o k lolz

josh you know much about copyright laws?

Sorta depends on if u registered it as a copywrite as well.

For example, Slides turbo face logo is IN FACT Team Krazys club logo, as Team Krazy dont own the logo its not anyones really

as far as i was aware anything I design or take a photo of I own the copyright until I say otherwise that is usually by form of letter stating I no longer hold copyright

photo's u would need to prove u took, ur art well.. well uhave them saved in programs, so thats easy. I searched google, a bit came up. Key word it down to your industy or art work, should find something

get this: I quote her $760 to design a logo for her she basicly laughs at me and says dont worry about it she will get somewhere cheap to do it im like ok now worries go get some quotes, thinking to myself good luck!

bout 2 weeks later i get a call - Dan, I have been getting quotes and they are all like in the thousands!! One place wanted $7500! Im like yeah... did you think I was trying to rip you off or something? She goes on to say how much she loves the other work i have done for her and how she wants me to do her logo now...

So i sent here first set of concepts, she made some changes then sent changes to what she wanted, she was basicly satisfied at this point just wanted one more change and it should be good to go, any ways I get a call a week later (I had not done the change yet) She starts ranting and raving Im taking long and she wants me to stop all work I was doing for her business blah blah blah!

Next thing I find she took my artwok into someone and got a slight modification done and is using it as her new logo

This woman was my gf's boss and was supposed to be a "friend"

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...