Jump to content
SAU Community

Recommended Posts

just found out a previous client of mine is using a logo design i was working on for her she rejected the design and told me to stop all work i was doing for her business because it was taking too long to get what she wanted

she is using the design I did with a slight change to one of the elements as far as i know i can screw her for this - she aint gonna be happy when i turn up with a bill!!

So Transport are trying to take my license back off me as they f**ked up, yeap they f**ked up. They worked out they gave me my opens inside the 3 year window haha, PLUS ontop of that they didnt add on the extra suspension times on my P's. Now they wana put me on a suspensed license or a 1 year thing, but im like you cant offer me that, Ive only lost 9 points out of 12. I have 3 left, its your problem u f**ked up, plus i'm well into me having my opens, you cant just go back in time haha

RTA suck :(

ROFLCOPTER NO MORE PORSHE MIDNIGHT RUNS

Hey shane bish, Wheres my flame pics. :D

i can make some good flaming GTST material if u want.

u wouldnt fit, shes 14....

interesting.. :worship:

just found out a previous client of mine is using a logo design i was working on for her she rejected the design and told me to stop all work i was doing for her business because it was taking too long to get what she wanted

she is using the design I did with a slight change to one of the elements as far as i know i can screw her for this - she aint gonna be happy when i turn up with a bill!!

bill her ass

my mate put a T3 33 GTST turbo on his 1.5L na honda.. then he just put a Vtec head on. and i just did his timing belts and stuff..

weird thing was. i put it in gear got someone on foot brakes to lock the driveline and still getting the crank to spin..???

hmm went to drift practice to watch ARE31 is doin really well and same with DRFT R33 GTST.

i wish i was out ther. time to get my car runnign again. lol

maybe if it wasnt a defected pos ud be a o k lolz

josh you know much about copyright laws?

Sorta depends on if u registered it as a copywrite as well.

For example, Slides turbo face logo is IN FACT Team Krazys club logo, as Team Krazy dont own the logo its not anyones really

as far as i was aware anything I design or take a photo of I own the copyright until I say otherwise that is usually by form of letter stating I no longer hold copyright

photo's u would need to prove u took, ur art well.. well uhave them saved in programs, so thats easy. I searched google, a bit came up. Key word it down to your industy or art work, should find something

get this: I quote her $760 to design a logo for her she basicly laughs at me and says dont worry about it she will get somewhere cheap to do it im like ok now worries go get some quotes, thinking to myself good luck!

bout 2 weeks later i get a call - Dan, I have been getting quotes and they are all like in the thousands!! One place wanted $7500! Im like yeah... did you think I was trying to rip you off or something? She goes on to say how much she loves the other work i have done for her and how she wants me to do her logo now...

So i sent here first set of concepts, she made some changes then sent changes to what she wanted, she was basicly satisfied at this point just wanted one more change and it should be good to go, any ways I get a call a week later (I had not done the change yet) She starts ranting and raving Im taking long and she wants me to stop all work I was doing for her business blah blah blah!

Next thing I find she took my artwok into someone and got a slight modification done and is using it as her new logo

This woman was my gf's boss and was supposed to be a "friend"

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
×
×
  • Create New...