Jump to content
SAU Community

Recommended Posts

post-14115-1148538511.jpgI have 2 sets of mags off my R33 but will suit 300zx, soarers, s15, s14, etc.

1 set of Rays engineering Volk racing challengers in good condition. 18x9, with 235 tyres on front and 265 on rears. Offset is +40 PCD 114.3

$1300

1 Set of 17x9 Nismo 5 spoke with good tread, has numerous gutter marks but no structural damage.

Front has 235s and rears 255s. Offset +38 PCD 114.3.

$700

And a pair of recaro front seats in good condition except for the seam splitting on right driver side pad. Just stitch it up and its beaut. Im looking to swap over for stock r33 seats plus $400 cash. Fully complete with rails.

$400 plus stock r33 seats changover or $700 the pair outright incl rails.

R33 GTST S1 AFM, $100

R33 genuine Nissan floor mats front and back (complete set) $100

R33 GTR spoiler with GTR carbon fibre end plates (painted in red) $300

R33 GTST S1 turbo manifold $50

Please call me on 0412500318 if you want to get to me quickly, i dont check forums often.

I live in the henley beach area.

post-14115-1148538616.jpg

post-14115-1148538743.jpg

post-14115-1148607275.jpg

post-14115-1148607344.jpg

post-14115-1148607451.jpg

post-14115-1148607509.jpg

post-14115-1148721091.jpg

Edited by popeye132

the front nismo rims cant be 9inch wide....they have nearly no dish compared to the rear?? if they were all the same width with same offsets then the depth of the rim dish would be the same front an rear.

id guess the fronts are 8 inch wide, may have different offsets to the rear??

either way, good price for nismo's with good tread. good luck

the front nismo rims cant be 9inch wide....they have nearly no dish compared to the rear?? if they were all the same width with same offsets then the depth of the rim dish would be the same front an rear.

id guess the fronts are 8 inch wide, may have different offsets to the rear??

either way, good price for nismo's with good tread. good luck

yes, sorry i measured wrong cos the front tyres are 235s and rims are 8in on front

sorry for my error but the measurements i took for wheels were back only.

nismos have 235 tyres on front and 255s on back, i assume 8-8.5in fronts and 9-9.5in rears, if someone tells me how to measure exact rim width I would gladly do so.

Volks have 235s front and 265 rears.

Few questions?

- Are the Nismo 17" rims still available?

- Are you willing to send to Melbourne?

- Are you able to test fit a Nismo 17" front rim on a 33/34 GTR with standard brakes? I have 33 GTR Brembos on my Gts-t, so i need to make sure they clear the calipers without the need for spacers.

- Are the Nismo 17" wheel "light weight"?

- Can you show/send a few more pics of these wheels on your car? Especially interested to see if the rears are sticking out the gaurds, so pics from the front, rear and above the arch would help alot.

:cheers:

Alan

Few questions?

- Are the Nismo 17" rims still available?

- Are you willing to send to Melbourne?

- Are you able to test fit a Nismo 17" front rim on a 33/34 GTR with standard brakes? I have 33 GTR Brembos on my Gts-t, so i need to make sure they clear the calipers without the need for spacers.

- Are the Nismo 17" wheel "light weight"?

- Can you show/send a few more pics of these wheels on your car? Especially interested to see if the rears are sticking out the gaurds, so pics from the front, rear and above the arch would help alot.

:)

Alan

The nismos have sold, there has been some interstate buyers interested in the volks. Can do for $1300 posted anywhere in oz via pack and send or $1100 picked up/$900 +tradein stockies.

Make me an offer on the seats, can sell with or without swapover.

Hey popeye, long time no see.

Im interested in the recaro's. Have the rails been modified to only suit the R33 or can those modifications be bolted off.

Pending if they fit in my Laser which have recaro's in them already from factory, (I want to keep the stock ones for collector items and use yours).

I could try and fit them in.

I also have a pair of R33 stockies to help you with your quest lol.

My msn is [email protected], give me a holla on there.

Edited by gtrGhosTDoGG11

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...