Jump to content
SAU Community

Recommended Posts

ok so i finally finished installing my FMIC today and went for a lil test drive in it. Had the boost controller adjusted wayyy out so stock boost. Gave it a bit and i felt it jump back alot once i hit 4.5k rpm. It used to do this before i adjusted the boost up to 12 so i just assumed it was that and got out and adjusted it up (although it had done it more than before) so i cranked it to where 12 psi is, then accelerated in 1st to about 4500 rpm. Felt a bit better until i hit the 4500 rpm then a loud bang and a whizzing sound from my turbo. Then the car stalled. .. I started it once more and it idles but very roughly and the turbo whizzes very loudly, as soon as i put any strain on it it stalls, I can hear a rattling sound coming from my inlet manifold to. Is my turbo/engine rooted? If so what would have caused it? Could it be a problem caused by some kind of intercooler leak?

Edit... hose ^^

Edited by r32 gts-turbo

wait up, was a hose came off but was ver hard to see from the angle i was looking at lol. Um should my inlet manifold be rattling tho, the hose is on but im scared to start it as im scared it sucked up some crap into the manifold and its siting there

Edited by r32 gts-turbo

yeh was the hose, sorry if my sentences sucked, i tried to say nevermind it was a hose but came out all retarded. I think was just something to do with unburnt fuel or something causing the ticking in the inlet manifold. With hoses on its gone. Was woried :)

have got a problem still tho. I get what sounds like an annoying constant beeping as soon as boost kicks in. Its not the normal turbo spooling sound and doesnt incease in frequency much.. Is this because of the new cooler or something? Or is there likely to be a boost leak somewhere

found the problem, the underside of one of the silicon joints had a split in it :) Thought those things were good for a fair bit of pressure and stretching (didnt overtighten em) ive replaced it and will eventually replace them all. Its the justjap kit, all the welding is pretty mickey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
    • This is mine, works a treat for the cars, suction is good, I use the Bissell clean and protect stuff I have found giving it a good spray and light scrub with the soft brush on the head of the nossle for carpet, and a rub with a microfibre for cloth seats and cloth door trims, prior to another quick spray before vacuuming it up works the best @GTSBoy You would surprised on what it gets out of carpet and seats that actually "look" clean, I recommend that you test drive yours when you have a little time to kill, then post pics of the muddy looking water that I believe you will find
    • I think even the "commercial" capacity ones that you would hire from supermarkets etc wouldn't have the capacity to do all that much in one go. I will go through half a dozen tanks of solution and dumps/rinses of the waste tank for one little 2 seat sofa. Or similar for one 6 footish rug. That's the price you pay for something small that only takes up a bit of cupboard space, instead of something that takes up the entire laundry cupboard or half the shed.
×
×
  • Create New...