Tial 38mm Wastegate Plumbing

[Waldo]

hey guys just having a bit of confussion, with how to plumb a tial 38mm wastegate up, like i need to know where the 2 vacuum fittings are supposed to go to...im running a power fc ebc with it aswell and need to know what goes where as im a bit unsure.

cheers

[Craved]

the air feed on the side is fed straight from the plenum.

the fitting on the top is from your EBC.

[Waldo]

so i take one line from the plenum to the side of the wastegate then to plumb the ebc in, i take one hose from the wastegate to the ebc then another from the intercooler pipe (before throttle body) to the other side of the ebc or do i take another from the plenum to the other side of the ebc?

[Craved]

2 feeds from the plenum ...

1 for the EBC, other for the wastegate.

EBC on top of WG,

plenum feed to side

[Waldo]

can i take the feeds from the intercooler pipe ( right near the compressor housing) instead of the plenum...or does it have to be from the plenum

[Craved]

you can run it from there, but you will see the boost drop off high in the rev range as your intercoolers restriction comes into affect ...