Jump to content
SAU Community

Recommended Posts

Hi all,

I'm located on the Central Coast (NSW) and travel to Sydney regularly. I'm happy to bring down parts that I can fit in the car for inspection, otherwise for larger parts you will have to come and inspect yourself.

32 GTR Bottom Lip for Front Bumper $110.00 Price drop $80.00

32 GTR Front Reinforcement bar with speedholes cut $110.00 Price drop $100.00

32 GTR Centre Guages $110. Price drop $80.00

32 GTR tailshaft $130 Price drop $100.00

32 GTR STock ECU $200 Price drop $120.00

32 GTR Airflow meters $175 each

32 GTR right blinker (orange) $100

32 GTR Intercooler Piping $120

32 GTR blow off valves $170 for both

32 GTR Bonnet with Nismo Splitter excellent Condition Gunmetal $750 Price drop $675.00

32 GTR Right Guard Gunmetal good condition no dents or scratches $300 Price drop $250.00

32 Tail lights $90.00 each grey

32 GTR Fan Shroud $150 Price drop $100.00

32 GTR font right pod $90.00

32 GTR rear bumper $130.00 grey good condition Price drop $110.00

32 GTR rear bumper support $100

R32 GTR rear 3/4 panel trim excellent condition $90 each

R32 GTR rear seat excellent condition $300 Price drop $250.00

Parts below have no price. Will finalise these prices shortly.

R32 Kick Panels

R32 Doors complete with mirrors grey good condition (might seperate)

32 GTR door trims fair to good cond

post-775-1149057163.jpgpost-775-1149064505.jpg

post-775-1148985543.jpg

post-775-1148985593.jpg

post-775-1148985620.jpg

post-775-1148985663.jpg

post-775-1148985918.jpg

post-775-1148986011.jpg

post-775-1148986081.jpg

post-775-1148986125.jpg

post-775-1148986173.jpg

post-775-1148986258.jpg

post-775-1148986281.jpg

post-775-1148986348.jpg

post-775-1148986387.jpg

post-775-1148986478.jpg

post-775-1148986530.jpg

post-775-1148986588.jpg

post-775-1148986629.jpg

post-775-1148986718.jpg

post-775-1148986765.jpg

post-775-1148986791.jpg

Edited by blukie
  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

hey.

would you seperate parts from the rear cradle?

im after the runing gear ie.

diff

half shafts

hubs

hand brake mech + cables

thx

Macca

Macca, I'll give it a fortnight and if I have not sold it I'll consider

I am after the reinforcement bar for the front bar...so if anyone is just after the front bar and doesnt want the reinforcment pls let me know and we can purchase together - since it's being sold as a package. This should hopefully make the front bar work out cheaper too??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...