Jump to content
SAU Community

Recommended Posts

Hi Guys have the following parts from My r32 GTS4 rb20det for sale :D, as well as many new parts. Your welcome to come have a look before purchasing, i am located in adelaide, if interstate i can get you a freighting quote. Any Further Questions just ask!

rb20det inlet plenum (polished), injectors, fuel rail, fuel reg, cold start actuator,tb, tps, $200

rb20det stock dump pipe $20

rb20det stock front pipe $30

rb20det AC compressor $50

rb20det AC bracket and belt tensioner $30

rb20det rubber intake pipe $20

rb20det turbo heat shield $10

rb20det timing belt brand new $30

rb30 head gasket MONOTORQUE brand new $30

rb30 Sump Gasket brand new $20

rb20det power steering belt brand new DAYCO 4pk0940 $20

rb20det spoiler with brake light, marone in colour $120

HKS turbo elbow pipe with silicon rubber $100

R32 Intercooler Very good condition $100

Cheers FOOLBOOST

PICS UP SOONISH :)

MORE PARTS ADDED!

post-26467-1149208867.jpg

post-26467-1149208889.jpg

post-26467-1149208903.jpg

post-26467-1149208922.jpg

post-26467-1149208941.jpg

post-26467-1149208959.jpg

post-26467-1149209261.jpg

post-26467-1149209275.jpg

Edited by AM-PERFORMANCE
Link to comment
https://www.sau.com.au/forums/topic/120553-rb20det-parts-much-more/
Share on other sites

I'll take the head-manifold intake gasket?

I'm also interested in the intake manifold if you will seperate the upper polished part from the intake runners, IAC fuel rail and injectors etc. I only need the lower part to make a plenum from.

Cheers,

Ian

I'll take the head-manifold intake gasket?

I'm also interested in the intake manifold if you will seperate the upper polished part from the intake runners, IAC fuel rail and injectors etc. I only need the lower part to make a plenum from.

Cheers,

Ian

Ian im not sure what you mean do you mean just the gaskets or the head, and manifold intake gasket, one of the gaskets goes in between the plenum and runners where as the other attaches the runners to the head, posted some pics of the head and plenum top half.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...