Jump to content
SAU Community

Wtb: Rear Quarter Window

grandmasterb

By grandmasterb,
in Tasmania

 Share

Recommended Posts

grandmasterb Grand Master

grandmasterb

Posted
Posted

Im after a rear quater window for the left hand side to suit my R32 GTS-t to replace after the car was stolen.

Need it in good condition with no visible scratch's or marks as it has to be tinted.

Reply. PM or bj_glover(at)hotmail.com

Cheers GMB

Link to comment
https://www.sau.com.au/forums/topic/121394-wtb-rear-quarter-window/
Share on other sites
  • 7 months later...
DJRIFT Veteran

DJRIFT

Posted
Posted
The skyline up here has been rolled.. No glass what so ever unfortunatly

they skyline at chirchill park has been roled but the only window left in it is the Left hand back one which GMB is after. i went and had a look about 6 months ago for gmb but they told me they didnt know how to get it out with out wrecking the rubber seal around it and it would cost more than GMB wanted to pay to get it out. so if someone knowas how to pull one out with out wrecking the seal than that would be handy.

ive tryed to help out as it has taken me a few trips out of my way but unfortunatly i cant do anymore. sorry.

grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
There is a wreaked r32 in launcestion at a wreakers i have the number if you want to call them i think the left window was fine but the right was smashed

Rang the wrecker already after Damo past on the details, still waiting to hear back from him :(

is that as mentioned above?

Yep same one.

It looks like i may of found one anyhow but will see how it goes :sick:

GMB

  • 2 weeks later...
Wogboy Mentor

Wogboy

Posted
Posted
they skyline at chirchill park has been roled but the only window left in it is the Left hand back one which GMB is after. i went and had a look about 6 months ago for gmb but they told me they didnt know how to get it out with out wrecking the rubber seal around it and it would cost more than GMB wanted to pay to get it out. so if someone knowas how to pull one out with out wrecking the seal than that would be handy.

ive tryed to help out as it has taken me a few trips out of my way but unfortunatly i cant do anymore. sorry.

I've pulled a few out without wrecking the seal. You start on the inside and use a long bladed retractible knife and work your way round cutting the silicone seal, there is 1 nut on the rear corner and a plastic locating pin in the top front corner, be patient and it will come out easy.

There's a guy in Smithton that had a couple, with out the rudder seal tho.

grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
I've pulled a few out without wrecking the seal. You start on the inside and use a long bladed retractible knife and work your way round cutting the silicone seal, there is 1 nut on the rear corner and a plastic locating pin in the top front corner, be patient and it will come out easy.

There's a guy in Smithton that had a couple, with out the rudder seal tho.

You wouldn't have a contact for him by chance would you???

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...