Jump to content
SAU Community

Wtb: Rear Quarter Window

grandmasterb

By grandmasterb,
in Tasmania

 Share

Recommended Posts

grandmasterb Grand Master

grandmasterb

Posted
Posted

Im after a rear quater window for the left hand side to suit my R32 GTS-t to replace after the car was stolen.

Need it in good condition with no visible scratch's or marks as it has to be tinted.

Reply. PM or bj_glover(at)hotmail.com

Cheers GMB

Link to comment
https://www.sau.com.au/forums/topic/121394-wtb-rear-quarter-window/
Share on other sites
  • 7 months later...
DJRIFT Veteran

DJRIFT

Posted
Posted
The skyline up here has been rolled.. No glass what so ever unfortunatly

they skyline at chirchill park has been roled but the only window left in it is the Left hand back one which GMB is after. i went and had a look about 6 months ago for gmb but they told me they didnt know how to get it out with out wrecking the rubber seal around it and it would cost more than GMB wanted to pay to get it out. so if someone knowas how to pull one out with out wrecking the seal than that would be handy.

ive tryed to help out as it has taken me a few trips out of my way but unfortunatly i cant do anymore. sorry.

grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
There is a wreaked r32 in launcestion at a wreakers i have the number if you want to call them i think the left window was fine but the right was smashed

Rang the wrecker already after Damo past on the details, still waiting to hear back from him :(

is that as mentioned above?

Yep same one.

It looks like i may of found one anyhow but will see how it goes :sick:

GMB

  • 2 weeks later...
Wogboy Mentor

Wogboy

Posted
Posted
they skyline at chirchill park has been roled but the only window left in it is the Left hand back one which GMB is after. i went and had a look about 6 months ago for gmb but they told me they didnt know how to get it out with out wrecking the rubber seal around it and it would cost more than GMB wanted to pay to get it out. so if someone knowas how to pull one out with out wrecking the seal than that would be handy.

ive tryed to help out as it has taken me a few trips out of my way but unfortunatly i cant do anymore. sorry.

I've pulled a few out without wrecking the seal. You start on the inside and use a long bladed retractible knife and work your way round cutting the silicone seal, there is 1 nut on the rear corner and a plastic locating pin in the top front corner, be patient and it will come out easy.

There's a guy in Smithton that had a couple, with out the rudder seal tho.

grandmasterb Grand Master

grandmasterb

Posted
  • Author
Posted
I've pulled a few out without wrecking the seal. You start on the inside and use a long bladed retractible knife and work your way round cutting the silicone seal, there is 1 nut on the rear corner and a plastic locating pin in the top front corner, be patient and it will come out easy.

There's a guy in Smithton that had a couple, with out the rudder seal tho.

You wouldn't have a contact for him by chance would you???

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • Kinkstaah
      My BMW 335i

      By Kinkstaah · Posted

      I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...