Jump to content
SAU Community

Recommended Posts

hi all i just wanted to know how much is involved ie is there any hard parts that need to be addressed when doing a manual conversion in a 32. i have emailed quite a few wrecking places all over aus and the best (kit) comes from D1 garage for 1000 including everything. is there cheaper options?

if this has allready been done to death please point me in the right direction as i couldnt find anything.

secondly what is a good cheapish clutch to use if a bit of spirited driveing is needed? only needs to handle mild power

and thirdly do the auto 32s come with an open or viscus diff? i want to get a 2 way later but for now i would like to know. also if it does have an open wheeler could shagged viscuss be cheaply shimed up and used for the time being or is that just a waste of time? i just read a thread on this but no one realy had any total prices.

thanks for any input or just pointing me in the right direction.

damien

Link to comment
https://www.sau.com.au/forums/topic/121527-auto-to-manual-gearbox-and-diff/
Share on other sites

only telling you what other people have told me coz i asked the same thing yesterday.

youll need:

manual tailshaft

pedals (brake, clutch)

clutch line

clutch slave cylinder

clutch master cylinder

manual flywheel and bolts (different sized bolts)

rb20 gearbox

tunnel rubber boot

inside plastic surround and gearboot

clutch + clutch pressure plate

clutch trust bearing

ive heard that the auto ecu is useable but changes the gear ratios, not sure how true it is tho

dont bother with a stock rb20 clutch either.

thats all the info i got, big up to predator on these forums who gave me the info :)

gl with it all, steve :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Curious to see how the SpeedTek stuff holds up
    • The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...