Jump to content
SAU Community

Recommended Posts

redgtst and me went for a run last night through balhannah, hahndorf greenhill rd and gorge rd.. LOVELY

nice and cold lots of g forces and no piggies.now i need new tyres..... doh s03's bridgestone 18/265/35 $549 each ouch.......

Link to comment
https://www.sau.com.au/forums/topic/121675-went-for-a-run-last-nite/
Share on other sites

redgtst and me went for a run last night through balhannah, hahndorf greenhill rd and gorge rd.. LOVELY

nice and cold lots of g forces and no piggies.now i need new tyres..... doh s03's bridgestone 18/265/35 $549 each ouch.......

nice.

have you tried the Hankook Ventus K104 's before? they are pretty grippy, and not $550 each!!

nice.

have you tried the Hankook Ventus K104 's before? they are pretty grippy, and not $550 each!!

ALL other brands apart from bridgestone and yokohama are SHITE pirelli sux,michelin sux, hankook sux,toyo sux, khumo sux

you only get what you pay for.

when you have 300rwkw RUBBER AINT RUBBER

ALL other brands apart from bridgestone and yokohama are SHITE pirelli sux,michelin sux, hankook sux,toyo sux, khumo sux

you only get what you pay for.

when you have 300rwkw RUBBER AINT RUBBER

:)

yeah man, I know - I now see you look at your car like I do at my bike

totally understand and good on ya!

enjoy :P

Well thats a bit shallow other companies do make good tyres. As i beleieve michelin make pretty good f1 tyres. And i'm a huge fan of there motorbike tyres. I like the feel of them and there roll.

Where as my dad likes bridgestone alot.

may i introduce u "R" compound tyre?

s-03<RE-01<RE55s

Those really are the shizzle! We have had a few of our customers change from Michelin Pilot Sport Cups to RE55S's. Cheaper, longer lasting, and better grip on the track :mad:

This one customer bought 12 sets of Michelin's. He paid up front, was pissed because he got charged delivery, fitted a trial set of RE's to see how they compared with the Michelin's, and then had the dilemma of trying to get rid of the Michelin's because he loved the RE's so much! :P

How do the Nitto's hold up?

I believe Whatsisname is still running a set, I remember 555 something on the sidewall.

Last I saw that was able to get a lot of first gear down, what looked like all of second and making close to 300rwkw.

I had brigdestone potenza's on my gtr which has just shy of 300 rwk's and got less than 5,000km out of them. Now at $350 a trye, I thought they were s__t. :D

Now a mate at Affordable Wheels and Tyres told me to try the Hankook K102 tyres . They stick better in all weather and last 3 to 4 times longer. Now at $145 a tyre you tell me Price matters

By the way my tyre size is 225 50R16 92V

Thats my thought's anyway :ermm:

Edited by savage GTR

I have another on the cards..

A set of Federal SS595, apparently one of the better ones.

I believe Sky30 has tried a whole range of tyres on his rb30det 300rwkw rwd thing. These apparently came out on top for grip and were suprisingly cheap.

As cubes said, i have tried a few brands of tyres with my 300rwkw rb30det including Hankook, Toyo, perelli, and found the Federals to definately give the best grip, and last just as long as the others.

You only have to look at Theo Woollett's GTR that runs

9 second 1/4 miles on a set of Federals.

(And they are cheap at $160 for 225/45/17")

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...