Jump to content
SAU Community

R34 Newbie Introduction And Question

Kaneda
 Share

Recommended Posts

Kaneda Enthusiast

Kaneda

Posted
Posted (edited)

Hey guys,

Just wanted to introduce myself and post a few questions about the R34 GTT and importing one, well heres the story i recently went down to carizma and took a R34 GTT for a spin and was impressed ;) smooth, boost came on gradually and if given a little squirt wanted to leap forward...awesome :O Then i went away and while working started reading the various articles on the forum concerning the R34...now here are some questions i hope havent been covered :D

1. I heard good things on the forums about Jspec imports,Imports 101 and My Trading, are there any other reputable import businesses in Melbourne?

2. Do any you guys use the R34 as a every day car and how have you found it?

3.In the R34 GTT did it come in Bayside blue or were these just stolen resprays?

4. What are the negatives about owning a R34?

5. Is there a way to tell if the vehicle has been boosted?

6. And finally i was told that Log Books generally dont come with the car? are they stolen or kept by the auction houses in Japan?

7. Sorry one last question is importing a R34GTT and getting it complianced ect, is it the same cost as a showroom R34 would sell for here fully complied?

Thanx guys :D

Edited by Kaneda
Abo Bob Grand Master

Abo Bob

Posted
Posted

2. yes it is just like any other car.

3. yes but not common.

4. you may get addicted to modding.

5. only if they put it back to standard in a dodgy way.

7. dunno, lots of different prices. If I had my time again I would buy one that is already partially modified.

PAV34 Mentor

PAV34

Posted
Posted

1 - SSV in Oakleigh, give them go, they look after you before and after the sale

2 - i use it as an everyday car and its excellent

3 - later model 34 GTT's came in bayside blue, if you find one in good condition, i'd grab it straight away.

4 - negative attention (stereotyped)

5 - see above

6 - not sure about that...but i ended up with one

7 - my advice, buy it completely standard.

Kaneda Enthusiast

Kaneda

Posted
  • Author
Posted (edited)
1 - SSV in Oakleigh, give them go, they look after you before and after the sale

2 - i use it as an everyday car and its excellent

3 - later model 34 GTT's came in bayside blue, if you find one in good condition, i'd grab it straight away.

4 - negative attention (stereotyped)

5 - see above

6 - not sure about that...but i ended up with one

7 - my advice, buy it completely standard.

thanx for the info, can't find link to SSV, after the drive i didnt want to get out of it :D does this feeling continue? when i go to purchase i hope to find a stock one. :P

i love the fact that you can cruze with little boost and not stress the engine, but the power is there waiting to be unleashed :D

Edited by Kaneda
someonestolecc Grand Master

someonestolecc

Posted
Posted

Hey 'lowestcostR34compliance', if that is your real name, if you want to promote your business then sign up as a sponsor and support the club that supports your business.

As for compliance there are plenty on here in this section that can give their advice where they have been as customers, not as people promoting their own businesses.

Technically they have to bin the xenons I believe, in which case no, you don't. I'd actually try to have them removed in Japan if it was possible and replaced with a halogen pair there. Otherwise speak to a compliancer before you take it there and see what you can do - just don't pay for them as some people try to charge you when they're yours!

Kaneda Enthusiast

Kaneda

Posted
  • Author
Posted (edited)
Hey 'lowestcostR34compliance', if that is your real name, if you want to promote your business then sign up as a sponsor and support the club that supports your business.

As for compliance there are plenty on here in this section that can give their advice where they have been as customers, not as people promoting their own businesses.

Technically they have to bin the xenons I believe, in which case no, you don't. I'd actually try to have them removed in Japan if it was possible and replaced with a halogen pair there. Otherwise speak to a compliancer before you take it there and see what you can do - just don't pay for them as some people try to charge you when they're yours!

Thanks dude, any info on the whether the turbo is steel or ceramic? spoke to J-Spec before and was impressed,a top guy!

Edited by Kaneda
lowestcostR34compliance Rookie

lowestcostR34compliance

Posted
Posted
Hey 'lowestcostR34compliance', if that is your real name, if you want to promote your business then sign up as a sponsor and support the club that supports your business.

As for compliance there are plenty on here in this section that can give their advice where they have been as customers, not as people promoting their own businesses.

Technically they have to bin the xenons I believe, in which case no, you don't. I'd actually try to have them removed in Japan if it was possible and replaced with a halogen pair there. Otherwise speak to a compliancer before you take it there and see what you can do - just don't pay for them as some people try to charge you when they're yours!

<deleted>

And advertising on here? We have been trying, as others (see another forum on this site) for months now. One other business took 18 months according to them. We will just have to wait. We have been told to do it this way until the other happens.

If you don't own an R34 or are buying one, or own this site, it doesn't matter to you anyway.

Cheers

funkymonkey Grand Master

funkymonkey

Posted
Posted
We have been told to do it this way until the other happens.

You've been told? By who? AFAIK none of the admins or mods authorised that.

If you don't own an R34 or are buying one, or own this site, it doesn't matter to you anyway.

He's a moderator, its what he's supposed to do, so it does matter to him.

lowestcostR34compliance Rookie

lowestcostR34compliance

Posted
Posted (edited)
You've been told? By who? AFAIK none of the admins or mods authorised that.

He's a moderator, its what he's supposed to do, so it does matter to him.

Mr Funkymonkey,

We have been trying to advertise on here for months, literally. As have others I have been told by more than one moderator.

Yes, we have been told to do it this way, by one of the moderators of this Importing forum.

Yes, we have that in writing from him, and its still in our messages box from him.

If you can get us a banner ad or two, please do.

Cheers

Edited by lowestcostR34compliance
funkymonkey Grand Master

funkymonkey

Posted
Posted

I don't take care of site sponsorship or payment, so I can't help you with that. You can email neil@skylinesaustralia.com and christian@skylinesaustralia.com to try and expediate the matter.

As for whoever's adviced you to advertise or solicit your business in any section till then, I'm afraid that was bad advice. Please refrain from doing so until your sponsorship status has been approved. Feel free to forward any PM you have relating to the matter.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jacobzking
      Pipe from Greddy FMIC to Greddy intake manifold (RB25)?

      By jacobzking · Posted

      Does anyone sell a pipe that's made to go from the Greddy FMIC kit for ECR33 (RB25DET) to the Greddy intake manifold? 
    • niZmO_Man
      Borg Warner EFR Series Turbo's V 2.0

      By niZmO_Man · Posted

      Not that I know from experience, but in theory you'd want your gate spring to be as close to target pressure as possible, so you'd go with the higher gate spring?
    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
×
×
  • Create New...