Jump to content
SAU Community

Jackets... Get Your Supercool Sau Vic Jackets...


Recommended Posts

  • Replies 279
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Is that because you put your jacket down somewhere and swapped it with someone elses?

Na Bec

I noticed i had a XL a couple of nights after i picked it up from the meeting. And that night i took it straight out to the car..

All is good im happy with it .. But if someone wants to change a M for a XL thats cool to..

Am still waiting on payment for the following jackets:

Daz (spdkls) 160.00 Need response

Skybee (Ben) 160.00 Still wants it - will pick up soon

Crack (craig) 120.00 Need response

Yug 120.00 Need response

Mike Lowry 120.00 (to pick up/pay for at September meeting)

acsplit (Andrew) 120.00 Still wants it - will pick up soon

buzzin (Luke) 120.00 Still wants it - will pick up soon

coupethis 160.00 Need response

Graeme (gdogzgtr) 120.00 Still wants it - will pick up soon

For those of you who have indicated that you still want your jackets, if you could PM when you are ready to collect/pay, etc.

For the 3 people I have not had a response from, if I still have not heard from you by the end of next week your jackets will be sold if someone else is willing to pay before I hear from you.

I also have 2 M and 1 XXL left if anyone is interested.

Cheers

Hey Bec, I would be interested in one, but I'm intending to become a member some time soon so I guess i may aswell wait til then and save myself $40.I think I would be after a medium. Hopefully you might have one left!

Ok, sorry about the delay, but I'm cashed up now. I got the bank to put my member # as reference.

Pick the jacket up next meeting if that's ok?

Thanks.

Yep - got your payment. Thanks.

Pick-up at the meeting on Tuesday will be fine.

See you there.

  • 4 months later...

OK - after selling a couple more jackets over the weekend I have done a stocktake and the below is what I have left:

MEDIUM - 3

LARGE - 1

XX LARGE - 1

Prices are $120 (members) or $160 (non members).

I also have one XL jacket only (ie no vest) which if someone wants they can have for $80 (members) and $100 (non members).

Some of the above jackets have been reserved by the following

Daz

Skybee

gdogzgtr

(if you guys are still interested, PM me ASAP).

But - jackets are now on a 'first to pay, gets it' system.

So.........anyone interested, post here or PM me :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...