Jump to content
SAU Community

Now Only $199 - Buy From A Trusted Trader - Only $199

GKTECH

By GKTECH,
in For Sale (Business Traders)

 Share

Recommended Posts

GKTECH Mentor

GKTECH

Posted
Posted

CLEARANCE SALE!!

BUY FROM A TRUSTED TRADER!!!

Complete Front mount intercooler piping kits to suit all Major jap cars

To Suit, S13,S14,S15,R32,R33,R34,A31,RNN14 GTi-R, AND GC8 WRX!!

Excluding CA18DET

ONLY $199 - LIMITED STOCKS

The gktech front mount intercooler piping kits are constructed entirely of high quality 6061 aluminum. The piping is all mandrel bent and contains minimal weld marks throughout the whole kit. The kit includes all brackets, nuts, bolts, tripple layer silicon hoses, clamps etc. These kits are to suit an intercooler measuring 600mm long and to have 3" end tanks.

The kits are designed to be installed DIY and are very easy. For installation help please email us or give us a call.

Features & Specs:

-2.5" Mandrel bent aluminium

-100% polished piping

-Heavy Duty clamps

-All brackets are included

-Tripple layer silicon hoses

-To suit Inlet/Outlet: 3inch

-Great fitment every time

555.jpg 111.jpg 222.jpg 444.jpg 333.jpg

FREIGHT: (all items are sent out by registered post with full insurance)

VIC: $20

SA/NSW: $30

QLD: $35

WA/NT: $40

IN STOCK NOW READY TO BE SENT OUT OR PICKED UP!!!

To order please send me a PM or send an email to [email protected]

  • 4 weeks later...
  • 5 weeks later...
GKTECH Mentor

GKTECH

Posted
  • Author
Posted
what are the dimensions of the core and is it possible to purchase the core by itself ? pm me thanks

Hi and sorry for the slow reply, we were in Tasmania for Drift Australia and only just got back this morning.

The cores them selves are 600x300x76mm.

We do them for $160 + freight (or pickup from Hoppers Crossing, Victoria).

cheers,

Greg

GKTECH Mentor

GKTECH

Posted
  • Author
Posted
Hey Greg, any hard piping kits for GTR? After one for the 33.

Hi Geoff, it's funny that you ask.

One of the factories has just finished off a kit for the R32 and R33 GTR in aluminium.

I'll find out some more info and get back to you.

Greg

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • MBS206
      Starter motor replacment teeth count.

      By MBS206 · Posted

      I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...