Jump to content
SAU Community

Recommended Posts

heyyy guys

Got this little issue with the power output.

Car has been running fine till now

when car first turned on it idles at about 1100 then drops to about 500, used to idle at 1000 - 11000

sound from exhaust is like its riding fine then it drops a lil and picks up like its missing something.

Slow pick up on the revs when acc pressed, looking near the alternator section it sounds like its making a whinding noise, battery was replaced 4 months ago..........

car is 7000ks ova service schedule

(getting done this weekend)

anyone got any ideas ????

any help would b good :D;)

thanks

Edited by JUN`R32
Link to comment
https://www.sau.com.au/forums/topic/124304-power-issue/
Share on other sites

I thought that was pretty normal? Isn't it the cold idle control? Some little piece of metal that bends as it heats up apparently.

Still, have a search for "idle" or "cold start", because it sounds like a bunch of questions that have been asked before.

The whirring noise is probably your alternator or a belt... mine makes an induction kind of noise, but it's just normal belt sounds. As far as the accelerator pickup... are you saying that there is lag when you push the pedal, or that the revs climb too slowly when you jab the pedal? That could indicate an air leak.

I'm no expert, but if your car is well and truely due for the 100,000kms service, you could have something more severe if all these things started happening at the same time. A stuck idle bearing or pulley would make a lot of noise and also hold the revs back.

Link to comment
https://www.sau.com.au/forums/topic/124304-power-issue/#findComment-2297450
Share on other sites

But if he pushes the pedal down, the revs move too slowly... there has to be something amiss there! It's still a cable throttle-body, so when that is open, it should be drawing in plenty of air.

I guess even an air leak shouldn't cause that, otherwise it'd idle really poorly. Maybe a blockage or something more technical.

I'm at a loss really.

Link to comment
https://www.sau.com.au/forums/topic/124304-power-issue/#findComment-2298955
Share on other sites

A seized aircon, or water pump? Something is holding it back it seems... if the timing belt is rubbing against a seized idler or tensioner bearing, you won't have a timing belt for much longer.

Get your mechanic to check it out while he's servicing it mate.

Link to comment
https://www.sau.com.au/forums/topic/124304-power-issue/#findComment-2298962
Share on other sites

yehh i will have to get him too

thanks for the info

one more thing,

wen revving the engine to about 3 or 4 then releasing the acc the revs drop down to almost a stall, and pick back up slowly :S :S

when lights are turned of the engine revs rise a little,

battery has been changed for just a regular battery from kmart as it died 4 months ago, same power output though

anyone reckon this might be an issue aswell ??????????????

thanks heaps guys

Link to comment
https://www.sau.com.au/forums/topic/124304-power-issue/#findComment-2299398
Share on other sites

Do you have a BOV that vents to atmosphere? That can cause the car to actually stall when doing what you are doing... but then I think an air-leak could do that too. I also think that an air-leak could give you the slow revs. If not an air-leak, then some kind of bockage... either way it sounds like there's not enough air getting into the plenum/cyclinders etc. That's a novice guess, but i'm keen to hear what the problem turns out to be!

Don't buy batteries from Kmart and the likes.. they have probably been sitting on the shelf for 6 months or more. Best to get (at minimum) a Century heavy duty battery from a service station or better yet, from a reputable mechanic or auto electrician, as they turn over their stock much more frequently.

By heavy duty, I mean 11-plate, 400cca or more. You can go nuts on batteries, but unless you're running all sorts of flashy lights and multiple amps and subs, you won't need it. I run a 330cca 11-plate and one amp to drive my 4 speakers. No dramas with the stereo on for many hours while cleaning without flattening the battery.

Link to comment
https://www.sau.com.au/forums/topic/124304-power-issue/#findComment-2299826
Share on other sites

i got the oil and oil filter changed, as i didnt have time to do it myself, got car back on sunday

and it works fine, the revs go up and idles at 700 nicely, still need to change sparkies though

thanks for the info randy

will get myself a new battery aswell

cheers,

Link to comment
https://www.sau.com.au/forums/topic/124304-power-issue/#findComment-2303516
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...