Jump to content
SAU Community

Recommended Posts

D Day - 29th March 2003!

Doctor Drift's Dyno Day

THIS IS NOT A SPAM THREAD SOME POSTS REMOVED.

WHERE:

Goodguy's Performance

3/2 Gatwick St Bayswater

9am till 1 pm (maybe longer if enough interest)

Full day of dyno testing and tuning has been booked for the 29th of March. As you guys may have noticed the other days have filled up pretty quick... Let me know ASAP if your in.

Dyno is not run in shootout mode...

Cost:

$50 Wil cover you for a few runs, and minor tuning like CAS timing check, or boost controller setting

$10 Additional Charge for written speedo check at various speeds.

Additional charge for extra tuning, like SAFC or POWERFC etc etc...

Please Send me a private message, or e-mail, if you want to book a spot, and to discuss what you would like done while on the dyno.

Doc.

0411 878 961

CONFIRMED:

NismoR34

Jet-33

RUS

TUFR33

MUCK

riggaP

Adzmax

INASNT - 400rwkw Supra

DJ_L3ThAL

Jamezilla

Adz

Matty

R31Nismoid

Al

R32PWR - Mental R32 GTSt RB27 with twin HKS 2835R's

Ronin 09

RedlineGTR

Link to comment
https://www.sau.com.au/forums/topic/12472-dyno-day-29th-march-2003/
Share on other sites

Originally posted by INASNT

doc wont be able to make it :D

No 400 kw supra.... there'll be a few dissapointed people...

Also, I drove R32PWR's monster last night and snapped an axle on boost in second... DOH!!!! Looks like that wont be coming either....

Sorry no FWD

UPDATE:

The owner of the dyno has commitments and will be closing the door at 1 pm. We will now be starting at 7 am. Please come as early as possible. Spectators are more than welcome...

Doc.

Guest INASNT
Originally posted by Dr_Drift

No 400 kw supra.... there'll be a few dissapointed people...

Also, I drove R32PWR's monster last night and snapped an axle on boost in second... DOH!!!! Looks like that wont be coming either....

Sorry no FWD

only u could do that doc!! :bahaha: :bahaha: :bahaha:

7am is the start... you guys can rock up as early as you like..... The owner has to shut the door at 1 so we need to start early...

INASNT: There's actually two sets of fracture marks in the axle, and some are old.... It appears as though it was already busted... the tyres weren't even warm enough to get grip..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...