Jump to content
SAU Community

Antenna

skylinesome

By skylinesome,
in Car Audio & Electrical

 Share

Recommended Posts

skylinesome Enthusiast

skylinesome

Posted
Posted

Hey guys just put in a new pioneer head unit and i dont want the antenna going up all the time when playing a cd. Is there away you can hook it up to your head unit so it dosnt do this or do you just have to disconect the antenna wire from the head unit so it dosnt go up at all.

Link to comment
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

LOL! My car arrived with a Sanyo CD player, and the same thing happened.

I got my new head unit, wired it all up (correctly) and now it only goes up with radio.

Might want to check your wiring, the bodgy person who put the first one in ran the antenna wire to the head unit's remote wire. (used for switchin on amps) That made it go up each time.

Link to comment
Share on other sites
Plat Rookie

Plat

Posted
Posted

your gonna have to loop the remote wire out to a switch, as far as i know most pioneer headunits dont have a seperate wire for ariel, my 6800 just has a remote wire

Link to comment
Share on other sites
RANDY Veteran

RANDY

Posted
Posted (edited)

omg lol wtf!

Ditch that head unit! What kind of HU doesn't have a power antenna wire??

My first ever headunit was a Kenwood, bought for $40 from Cash Converters... about 6 years ago, and it was already a few years old at the time. IT had a power antenna wire!

Edited by RANDY
Link to comment
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Did you install it yourself? Have you checked the wiring?

Make sure your remote wire is not touching anything (unless you run an amp, in which case it should only be connected to the amp remote wire)

I'm pretty sure that Pioneer wouldn't design it like that, and i'm very sure that R33's antenna's don't do this on their own.

Link to comment
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

I will re check everything. When you mean make sure the remote wire isnt touching anything, do u mean that is should be connected to the remote power antenna wire coming out of the head unit?

or should i wire it so the wire for the antenna coming out of the car goes to nothing.

Did you install it yourself? Have you checked the wiring?

Make sure your remote wire is not touching anything (unless you run an amp, in which case it should only be connected to the amp remote wire)

I'm pretty sure that Pioneer wouldn't design it like that, and i'm very sure that R33's antenna's don't do this on their own.

Link to comment
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Umm.. the remote wire FROM the HU:

If you have an amp, make sure it's connected to the amp's remote wire.

If you have no amp, that wire should be taped up and tidied so that it doesn't short on metal or anything. It should NOT be connected to your antenna wire (factory loom side).

The HU should have a "p.cont" or "antenna" or something wire... this is the one for the antenna. I'd be shocked if a modern HU DOESN'T have an antenna control wire.

I might have made that unclear...

HU "Remote" wire -> nothing

HU "Power Antenna" wire -> antenna power wire in the factory harness

Link to comment
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

ok so let me get this striaght. The wire that powers the antenna goes to nothing.

And then the actual antenna wire just plugs into the head unit as normal.

If that is the case i dont see how the antenna will power up at all???

What i have done for the mean time is just wired it to the switch next to the a/c unit.

I might leave it like this so i can control the antenna even when i have the radio on.

Umm.. the remote wire FROM the HU:

If you have an amp, make sure it's connected to the amp's remote wire.

If you have no amp, that wire should be taped up and tidied so that it doesn't short on metal or anything. It should NOT be connected to your antenna wire (factory loom side).

The HU should have a "p.cont" or "antenna" or something wire... this is the one for the antenna. I'd be shocked if a modern HU DOESN'T have an antenna control wire.

I might have made that unclear...

HU "Remote" wire -> nothing

HU "Power Antenna" wire -> antenna power wire in the factory harness

Link to comment
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

ok after reading it agian it makes sense. My bad

But that is how i have wired it but the antenna still comes up when playing a cd.

ok so let me get this striaght. The wire that powers the antenna goes to nothing.

And then the actual antenna wire just plugs into the head unit as normal.

If that is the case i dont see how the antenna will power up at all???

What i have done for the mean time is just wired it to the switch next to the a/c unit.

I might leave it like this so i can control the antenna even when i have the radio on.

Link to comment
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Ah ok.. and yeah, the wire that you referred to is not actually an antenna power wire, it's the remote wire for an amp.

The antenna itself is powered via wiring in the boot.

Very odd that this would happen. 100% sure that you haven't got the remote and the antenna wire switched around?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      That may or may not be me that replied 😅
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Your response is extremely similar to what someone on the Haltech tuning tips Facebook page answered me. I take it you're also on there haha. Dyno is booked for June 27th and that's exactly what I'll be doing. I also realized I never setup a pulse width adder table so I went and did that last night. Made a fair bit of fueling difference in low load areas.  I sorted out my power steering belt woes. It was an alignment issue and it has now survived multiple instances of abuse that would have killed it prior. I also changed my fuel pump hose. The hose I replaced looks nothing like the legit gates hose I received. Real hose is actually 5/16" and is labelled properly. Amazon refunded me but has been giving me grief about my nasty review I'm trying to leave... I keep having to modify it for acceptance. I want to make sure the point gets across to others.  Last issue I want to deal with soon is the slight vibration I get in my steering wheel with my GKTech Spacers in front. My annoyance has grown and I'm at a point where I want it resolved. I've tried everything I can come up with like clean spacers thoroughly, tighten in star pattern, retorque, have wheels rebalanced 4-5x with a variety of machines (2x with a Hunter elite). I've also taken the spacers off and remounted multiple times just in case.  I'm starting to think my GKtech spacers are at fault. I'll pop a wheel off and toss a dial indicator on tomorrow to verify runout and parallelism. 
    • blackrex
      A Boy's Love For His Rb20

      By blackrex · Posted

      What ECU and PDM are you using Roy?
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Hmmm yeah nah 😅 Would swap for a F80 M3 Competition
    • The Bogan
      Like loud exhausts? You could be a psychopath.

      By The Bogan · Posted

      True, will I do like a good loud exhaust it cannot be ear bleeding or loud and front on the Hwy Lucky she didn't ask my daughter this question, she wouldn't have got the response she was after for her poll
×
×
  • Create New...