Jump to content
SAU Community

Recommended Posts

All parts off R33 GTS-t

1) R33 GTR Intercooler $700

2) Cat back Twin Muffler system very unique with bumper skin to suit $800

3) Blitz SuperSonic BOV $250

4)Turbosmart Bleed Valve $80

5) 17" Wheels with tyres (good tread) $800

6) HKS Air Filter (New Element) GREEN $130

Would prefer to sell the lot for $ 2,400. But will seperate

Also many spare for R33 Skylines let me know what ur after should be able to help or guide you in the right direction

Regards

Link to comment
https://www.sau.com.au/forums/topic/1255-performance-parts/
Share on other sites

Originally posted by GR8NES

All parts off R33 GTS-t  

1) R33 GTR Intercooler $700  

2) Cat back Twin Muffler system very unique with bumper skin to suit $800  

3) Blitz SuperSonic BOV $250  

4)Turbosmart Bleed Valve $80  

5) 17" Wheels with tyres (good tread) $800  

6) HKS Air Filter (New Element) GREEN $130  

Would prefer to sell the lot for $ 2,400. But will seperate  

Also many spare for R33 Skylines let me know what ur after should be able to help or guide you in the right direction  

Regards

Hi, mate

what sort of wheels you have there?

Link to comment
https://www.sau.com.au/forums/topic/1255-performance-parts/#findComment-25362
Share on other sites

No it has been stripped and very fins have been bent no major damage. I want 700 cause that what i paid for it and I know what wreckers sell them for. I will only take 700. If you still want it let me know you can have it tomorrow nite.

So it does have some sort of minor damage and its been stripped,,,,,Hmmm....Think I'll stick with my offer of $600.00,,,remember TOMORROW YOU can have $600.00 CASH in your pocket.

Neil

Link to comment
https://www.sau.com.au/forums/topic/1255-performance-parts/#findComment-25520
Share on other sites

  • 2 weeks later...

Have you got the bolt thingie that holds down the spare tyre in the boot? If so name your price :P

Also anything that might hold down the jack handle and stuff, when I got my car it was all floating around in the boot and I have no idea where or how it's all secured. Could be a bag or something, I have no idea.

JimX.

Link to comment
https://www.sau.com.au/forums/topic/1255-performance-parts/#findComment-30722
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey y'all! I'm curious about how y'all go about widebodying your cars. I noticed that when running a square setup, my front wheels are a bit more tucked in than my rear wheels. Not by much, maybe 5-10mm. This leads me to wonder - when I widebody, should I use narrower front flares and wider rear flares? I found a set of 40mm rear flares that I really like, and was thinking of pairing them with some 18mm front flares, but I don't want the car to look strange. How have others done this? Note, I'm in a sedan. Thanks!
    • And if it was anything other than an auto tranny part, it might be a problem. But seeing as all auto trannies belong in the recycling bin, it's fine.
    • I have an R32 Fenix rad. It is good.
    • All the schemas I can see, indicate your typical setup of ATF 'cooler' (read: heat exchanger) in the bottom radiator tank..ie; https://nissan.epc-data.com/stagea/wgnc34/5413-rb25det/engine/214/ ...but I can prattle on a bit here. These trannies have a thermistor in the sump ~ the TCU reads this and 1. bumps the line pressure up when the ATF is 'cold' and 2. prevents the TC lockup clutch from operating, until the ATF comes up to minimum operating temp (keeps the ATF 'churning' through the TC so it heats up quicker) -- trigger point is around 55C. In these conditions, the engine coolant temperature rises faster than the ATF temperature, and also helps heat the ATF up, which is why it's best to think of the in radiator tank setup as a heat exchanger ; the heat can flow in both directions... ...with these trannies, the 'hot' ATF comes out the front banjo bolt, flows through the cooler/heat exchanger, and returns to the box  via the rear banjo bolt. This gets a mention, due to the wildly different opinions wrt running auto trans fluid coolers ~ do you bypass the in radiator tank altogether, or put the cooler inline with the in radiator tank system...and then, do you put the additional cooler before of after the in radiator tank system?... ....fact is the nominal engine operating temp (roughly 75C), happens to be the ideal temperature for the ATF used in these trannies as well (no surprises there), so for the in radiator tank system to actually 'cool' the ATF, the ATF temp has to be hotter than that...lets say 100C -- you've got 25C of 'excess' heat, (slowly) pumping into the 75C coolant. This part of the equation changes drastically, when you've got 100C ATF flowing through an air cooled radiator ; you can move a lot more excess heat, faster ~ it is possible to cool the ATF 'too much' as it were...(climate matters a lot)... ...in an 'ideal' setup, what you're really trying to control here, is flash heating of the ATF, primarily produced by the TC interface. In a perfect world, wrt auto trans oil cooling, you want a dedicated trans cooler with builtin thermostatic valving - they exist. These should be run inline and before the in radiator tank system ~ when 'cold' the valving bypasses the fin stack, allowing the ATF to flow direct to the in radiator tank heat exchanger, so it works 'as intended' with helping heat the ATF up. When 'hot' (iirc it was 50C threshold), the valving shuts forcing the ATF through the cooler fin stack, and onto the in radiator tank heat exchanger...and you sort of think of it as a 'thermal conditioner' of sorts...ie; if you did cool your ATF down to 65C, the coolant will add a little heat, otherwise it works as intended... ...the 'hot' ATF coming from the front bango bolt, is instantiated from the TC when in use, so all/any flash heated oil, flows to the fluid-to-air cooler first, and because of the greater heat differential, you can get rid of this heat fast. Just how big (BTU/h) this cooler needs to be to effectively dissipate this TC flash heat, is the charm...too many variables to discuss here, but I just wanted to point out the nitty-gritty of automatic trans fluid coolers ~ they're a different beastie to what most ppl think of when considering an 'oil cooler'... /3.5cents   
    • Been a busy but productive day. Axle and hubs acquired. All fitted up after a bit of modifying. Need to sort out wider mudguards and running light reflector covers but other than that the trailer is gooood to go !!
×
×
  • Create New...