Jump to content
SAU Community

Recommended Posts

Im turning 17 at the end of this year and hopefully i will have

17grand saved for my car, I am thinking about buying a GTS r33 skyline. I could however continue to save my money and end up having about 20grand and be able to buy a GTST however do you think it is a bad idea buying a turboed skyline because of my age and also lack of driving experience. And if i do end up getting a GTS would i eventually be able to turbo it to bring it up to the gtst standards without having to spend alot of money. And is it worth importing a GTS skyline into australia, becuase prestiage imports look like they can import them very cheap to me.

Anyways just looking for some advice on what i should do.

Cheers!.

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/
Share on other sites

You are only young and (its up to you how stupid) once. I was driving a 427 Impala at 18, enjoy cars before the govt legislate us off the roads.

Either way be sure your parents will do insurance for you, as i woudnt recommend not having comprehensive insurance.

Sounds like your after an R33, did you know that the R32 came out with the RB25 in 93, so similar age to some of the R33s you may be looking at, lighter so better performance, and most likey cheaper.

I think they even have 5 stud wheels and bigger brakes then the the NA RB20s found in earlier R32s

Maybe if you start exporting Byron's finest local product to Sydney you may be able to afford an R34 GTR:D

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-230186
Share on other sites

Well......

Im not really looking for a $#@% load of power right now,

However in say 2 or so years i will be so i was woundering if i should get a Gts and just do overall body mods to it then after i while get a half cut gtst or the gtst engine and contiinue from there.??

Wat u reckon

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-230209
Share on other sites

Im 17 aswell

I was 99% sure in buying my r32 the only thing which pursuaded me not to buy it and wait a bit longer was the fact that i was told it was too powerful and yes if ur un experienced its dangerous for urslelf and to other drivers...

If u are a sensible driver and can control urself sure go for it...

But u only have 17k and you wont get insured comprhensively for anythign less then 5 or 6k so u better keep saving...

3rd party is useless cause theirs a high risk ur gonna crash with such a potent car once in ur first year of having it..or u may not depending on how sensible u are...its really not worth gettin it unless u have enough for insurance and cash aside to pay for ur repairs...

try a 3 litre non-turbo supra im sorta lookin at those now aswell

My mate has a non turbo skyline and its pretty weak...it gets beaten by friggin vti-r civics

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-230202
Share on other sites

I dont think converting NA Skylines to turbo is a great idea. It can be done, and plenty of people do it, but i dont know if they have... the same boxes, diffs, driveshafts, radiators, brakes not juct discs but master cylinders and brake boosters, or even a chasis that is as rigid.

If they have most of the above in common, great otherwise id be inclined to trade in for a turbo model.

...as for them having lots of power, i suspect a std family car will get most young guys in more trouble, as the boost and response of the engines means you are often on the exit of corners before power comes on, wheres as big 6s deliver torque on demand and can throw them sideways, perhaps easier. Im surprised i made it to 26 with friends driving their parents VN Commodores when i was 17.

No doubt they are quick little jiggers, but because of the competent chassis and suspension, in my opinion they can feel a little underpowered from the factory.

... whichever way you go, enjoy.

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-231212
Share on other sites

If I was you dude, I'd get the NA and then latter trade up to a turbo. I think a Turbo at 17 is pretty risky. I'm only 19 and have a turbo. I look at some of my friends my age and I think they'd be dead if they had a turbo. It comes back to maturity. I think when you first get your license though having a turbo isn't a great idea. Having lost people I know in car accidents, I'm inclined to tell you to get a few years experience before going down the turbo road. Besides, build up a bit of no claim bonus and It'll drop the insurance down a bit too.

Just my 2 cents.

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-232091
Share on other sites

Guest 4NGI3

Hi all, i was wondering if i can get some first-hand advice from anyone of u skyline owners.

I'm getting a '95 gtst soon and i wanted to know if u think its a good deal. ok, its got a gtr bodykit, intercooler, air pod, blow off valve, 64,000kms, and a good audio system but not the BEST, and its 22,900. is that a good deal? am sooo in lurrve with this car but i don't want to be hasty and get it just because i'm in love with it. i also want to make sure its a good deal too!

also i'm going from a lancer to this and its my DRREAM car but i must admit i don't know anyone who has a skyline. so i thought this would be the best place to get some quality advice. so i've got a few questions...

1. is the whole fuel factor REALLY bad? like does it really chew thru fuel that bad? bare in mind i'm going from a lancer gli to gtst.

2. if u have a prang, is it REALLY expensive to fix? and are parts in general hard to find and/or outrageously pricey?

3. coz its a turbo, does it have to be tuned every 3 mths or something? that's what i've heard.

4. what other types of running costs besides the usual service every 15,000 kms.

that's all i can think of at the mo'. but i'm sure i'll have more questions later. btw this site is wikid, its soo informative and helpful. i can't wait to get my skyline, get a sticker and a top and go on a cruise, woo hoo!! :D

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-232509
Share on other sites

to GtSkylinePeTe

get a N/A one for around $16000? then play around with it for 1 or 2 years, then trade for a R34 GTT :D

N/A R33 beat a SSS, it's a skyline!

1. my car run 350-370km a tank, around a$60?

2.i don't think they are expensive to fix and there are plenty of parts around, it only cost u a forture when u want NEW parts...

3. NO! but for nissan car(skyline, silvia) to keep it at top condition, service every 5000kms (oil changing) with good oil but not 15000kms

4. tyres!!:burnout:

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-235043
Share on other sites

4NGI3:

1. I get about 370km around town, 450km on a highway run. Just did a 220 km tank at Wakefield today!

I came from a 2001 Holden Astra that got 650kms around town and 800kms on the highway, plus it had a smaller tank!

2. I reckon if you hit the rear quarter panel it would be $$$. Dunno. Certainly there are a heap of parts around.

3. I do a major service every 10,000kms and an oil & oil filter change every 5,000kms.

4. The constant adiction to mods!

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-235100
Share on other sites

Guest 4NGI3

Thanks so much for ur input Maxx, CanberraR33! It would seem that I'm going from $30 a week in petrol to $50. i guess $20 isn't too much to sacrifice for a bit of style hey? :D

Roy, just one question, if i was "Pinging" with BP Ultimate, what exactly would i be doing? basically what does "pinging" refer to? i appologise i'm not "down" with the lingo yet. :newbie:

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-235383
Share on other sites

Guest Boxhead

i would suggest get a turbo, but be aware of your limits!!!, and also, dont mod it for a while, keep it as stock as possible, even exhuast, that should limit the power a bit, until you have gained a yr or so experience....

also, maybe start learning on if you have had 0 hrs practice, on a anotehr car, maybe your parents etc.

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-235400
Share on other sites

OK here is my plan get a r33 gts and try to do my best with

the car, just do the basic mods but not go over the top.

While i have the gts i would try to be saving money to get a gtst when i am more experienced and at the age of about 20-25.

As long as it beats for average 4 cyl car (pulsar sss) im happy.

Also how much would you pay for a gts, and is it a good idea to import one if so where and who would i import it through.

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-235431
Share on other sites

I got my GTST when I was 20 - moving up from my 1st car, an N15 auto Pulsar.

You're gunna get screwed on comprehensive insurance and you need to really be careful if you get a T.

I was initially looking at a GTS, only cos I didn't think I could afford a GTST. I waited a little longer and got what I really wanted and didn't look back.

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-236921
Share on other sites

4GNI3... Pinging aka, detonation, its basically when the air fuel mix combusts before the spark plug fires to ignite the mixture. Bad fuel, too much igntion, temperature, boost, compression, are seen as the main reasons for it occurring. Sounds a little lack pins rattling around in a tin can.

Some Jap cars tend to do it as they are tuned for better quality Jap fuel, ever noticed how Jap Silvia and WRX all have higher power ratings in Japan.

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-237134
Share on other sites

Yes the fuel in Australia sucks. It sucks a lot!

4GN13 I have heard pretty good things about prestige, and they seem like nice ppl to do business with. I nearly bought a car of them but found one localy just before I ordered it.

The benefit of buying local is you know exactly what your getting and you can get a mechanic to look it over. If you import you will get it cheaper but not everyone gets a good import. Most are happy but some are rather disapointed.

Of course with the new laws in regards to importing, you will have to get a car in stock form, or pay to have it returned to stock form and the modified parts distroyed. Just something to bare in mind.

Link to comment
https://www.sau.com.au/forums/topic/12588-what-to-do/#findComment-237225
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
×
×
  • Create New...