Jump to content
SAU Community

First Time At The Drags...

WazR32GTSt
 Share

Recommended Posts

WazR32GTSt Grand Master

WazR32GTSt

Posted
Posted

broke my drag racing virginity last night at Willowbank, QLD

car:

r32 gtst

rb20det automatic

155rwkw

time:

14.714

98mph

60' 2.503

The 2 things that were hurting me:

takeoff with the auto and rb25 turbo was hard. stomped on accelerator and brake and pulled up handbrake, but couldn't build positive manifold pressure as it has an rb25 turbo that's slightly too big to get boost at that load

i run out of power about 6000rpm as it gets too rich, so the auto changing at 7500rpm wasn't helping.. would ideally have changed at 6500rpm of there abouts

any ideas to improve?

I would have thought that with a 60' time of 2.2ish i could get mt ET down to 14.4ish with just that?

cheers,

Warren

Link to comment
https://www.sau.com.au/forums/topic/126090-first-time-at-the-drags/
Share on other sites
TurbostyleR Collaborator

TurbostyleR

Posted
Posted

I would say thats about right hey...

The 60 footer is pretty ghey but there is not much you can do with the factory stall on autos unless you get it restalled...

I would probably try and do kinda a line lock and before it starts to build up decent positive pressure in the inlet release the brake and kinda skid off the mark...may sound stupid, but i would give it a go...

WazR32GTSt Grand Master

WazR32GTSt

Posted
  • Author
Posted

shifting manually doesn't make a difference as it still changes are redline..

when you put your foot down, it activates the "power" function automatically and it can't be turned off when you're flat out...

and as i have an rb25 turbo, the exhaust wheel is slightly too big to make boost when stalling the auto at 1800rpm.. I would say its about -2psi (relative to atmospheric) at that load, so its quite close to making positive manifold pressure, but not quite there

rev210 Grand Master

rev210

Posted
Posted

like I said in the other one 98 mph is good for a high 13 with a better 60ft and a few decent shifts.

If you are holding consistant revs to stall you might find that you can't get positive boost. To hold the rpm at that level there isn't engough load to have the throttle opening enough for boost.

So perhaps just stomping the accellerator down is a better approach and forgetting the handbrake thing for now since you don't have a enough stall speed. having a snick of wheel spin off the line will get the turbo into boost otherwise you are bogging down.

lastlineofdefence Experienced

lastlineofdefence

Posted
Posted
shifting manually doesn't make a difference as it still changes are redline..

when you put your foot down, it activates the "power" function automatically and it can't be turned off when you're flat out...

and as i have an rb25 turbo, the exhaust wheel is slightly too big to make boost when stalling the auto at 1800rpm.. I would say its about -2psi (relative to atmospheric) at that load, so its quite close to making positive manifold pressure, but not quite there

could you just ease up off the pedal in a gear to make it down shift and then floor it again. if the previous rpm was around 80%+ then the car should just hold the next gear without down shifting.

Sydneykid Grand Master

Sydneykid

Posted
Posted (edited)
shifting manually doesn't make a difference as it still changes are redline..

when you put your foot down, it activates the "power" function automatically and it can't be turned off when you're flat out...

and as i have an rb25 turbo, the exhaust wheel is slightly too big to make boost when stalling the auto at 1800rpm.. I would say its about -2psi (relative to atmospheric) at that load, so its quite close to making positive manifold pressure, but not quite there

If you can make a little boost you will find the stall speed goes up, if you can get the stall rpm up you will make more boost (Catch 22).

What you need is a bit more ignition advance around 1800 rpm.

What are you using to tune it with? SAFC? Rechip? Power FC?

If you have an SAFC, try leaning it out around 1,800 rpm. That will give it some ignition advance at the same time. If you then get some pre-ignition with 98 ron, try Shell Optimax Extreme 100 ron. That will avoid the pre-ignition problem.

Once you get some boost (torque) you will find the torque converter stall rpm will go up. Even as little as 100 rpm might be enough to break the circle.

:( cheers :pirate:

Edited by Sydneykid
WazR32GTSt Grand Master

WazR32GTSt

Posted
  • Author
Posted

gary - stock ECU (i know, i know, its my next engine mod.. but goign the shift kit first)

don't have the snow mode button, only the "hold" which i believe is the same thing - will try the 2nd-gear-takeoff-then-into-first method before i go next

neutral dump? i'm not an idiot...

no point buying smaller tyres as it defeats the purpose of my drive in, drive away approach

oh, and i ran it on optimax extreme, like i do everyday :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      LOL.... a good amount of people (not all) on that continent seem to know everything and like to measure things in bananas, football fields, statue of liberties instead of the metric system lol.
    • dawhitehonky
      M35 Aftermarket Fuel Pump

      By dawhitehonky · Posted

      I assume the modules are similar enough, so if you've had no issues I don't see why I would. I have tried to find a wiring diagram for the FPCM / fuel pump circuit, but I can't find it anywhere. Otherwise, I would just do some wire cutting and joining at the FPCM and give the 12 V supplied to the FPCM directly to the pump instead. If you know anyone that could help with wiring diagrams, I'd be very happy  
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      If it dies, then bypass. The task isn't difficult. I have one running on a standard R32 FPCM. That's after nearly 20 years of it running an 040, which pull substantially more current than the Walbro. They're not the same module, but I'd hope it indicates that the R33 one should be man enough for the job. I think people kill them when putting proper sized pumps on them, not these little toy pumps we're talking about here.
    • GTSBoy
      Rapid-fire squeaking/creaking from rear suspension

      By GTSBoy · Posted

      Silicone spray won't hurt anything. And if it does, that's an opportunity to put some solid steel spherical bushings in, so you can really learn what suspension noise sounds like, If you're going to try it, just spray one bush at a time, so you can work out which one is actually noisy. My best guess is that if the noise started only since putting the coilovers in, then it is just noise being transmitted up through the top mounts of the struts, and not necessarily "new" noise from bushes. But it's almost impossible to know.
    • GTSBoy
      Jacks that fit under GTR lips that can reach the subframe?

      By GTSBoy · Posted

      Are you saying the 34 is SUV height, and not that we're talking about an SUV here? (because if we're talking about an SUV, you don't fix them. You just replace them when something breaks. Not worth establishing sufficient emotional connection with an SUV to warrant doing any work on one). I wouldn't jack my car up on a short little loop of 10mm steel rod poking out through a hole in the bumper bar, front or rear end. I realise that we're probably not talking about that type of loop at the front, being the one under/behind the bar on a Skyline.... but even for that one, trying to jack up on what amounts to a thin piece of steel, designed purely for withstanding a horizontal tension force, not a vertical compressive force (and so would be prone to buckling/crushing) and, my most particular bitch about it - located RIGHT AT THE EXTREME FRONT OF THE CAR, applying a load up through the radiator support panel, etc, with almost the entire mass of the car cantilevered between there and the rear wheels? Nope. Not doing that. Not on the regular. That structure out there in front of the front crossmember is not designed to carry load in the vertical direction. Not really designed to carry any load at all, really. The chassis rail that the tow point is connected to would be fine loaded in tension, as per towing. Not intended to carry the mass of the whole car, especially loaded all on one rail, with twisting and all sorts of shitty load distribution going on. No, I will happily drive up on some pieces of wood, thanks. That can only happen on driven wheels, and they are at the other end of the car, and this problem does not exist at that end of the car. And even then, I have been known to drive up on at least 1x piece of 2x8 each side at the rear, simply to reduce the amount of jack pumping necessary to get the car up high enough for the jack stands. What really really shits me about Skylines is the lack of decent places for chassis stands at either end of the car. You'd think they'd be designed into the crossmembers.
×
×
  • Create New...