Jump to content
SAU Community

Recommended Posts

Had this sent to me by my sister in law:

gallery_4816_41_34876.jpg

This is 'Yamanba' style. The meaning of Yamanba has it's roots back in early times in Japan when cannibalism was rife in certain places due to food shortages, and an 'old hag woman' or 'Yama uba' would draw people out of the village so she could eat them. Actually it was just a story cooked up so that the villagers would fool themselves (and their children) into denying their own cannibalistic ways. The term used nowadays points more to the 'old hag' meaning rather than cannibalism of course lol...

Yamanba are generally looked down upon (it would take a very particular person not to) in Japan and the style also extends to the guys aswell, although not as prevalent as with the girls. There are magazines dedicated to this style, and of course clothing shopsetc dealing solely with Yamanba/Ganguro fashions and accessories. I've seen foreigners stop dead in the tracks and get a video camera out and film some Yamanba in Shinsaibashi in Osaka one time, with the Yamanba thinking they were a foreign film crew, so they did all these hand signs and poses right there in the middle of the mall... the foreigners were chuckling and just saying 'WTF! haha'.

The Yamanba style is an extention of 'Ganguro' (light hair colour, dark tanned skin) which itself is an extention of the 'bronzed/bleached hair look'. In most major cities in Japan you can see these sorts of girls getting around, but in Tokyo it's the worst. In fact that picture above is the worst I've seen yet, and my sister in law reckons those yellow stones under her eyes are actually PIERCED ON.

I did see a show one time on Japanese TV where it was a kind of mini-documentary following the 'sobering up' of an ex-Yamanba (who incidently had 2 kids). The biggest thing she had to overcome was taking all the Yamanba clothing and accessories and throwing them in the trash. They dealt with it like it was a disease or something, like a blight on society rather like unemployment or anti-social behaviour.

I think in the late '90s this style hit it's peak, but you can be sure to see these interesting creatures come out in summer in Japan these days aswell.

Link to comment
https://www.sau.com.au/forums/topic/126295-yamanba/
Share on other sites

Saw HEAPS of these girls around harajuku, meiji-jingu-mae and yoyogi kooen area. bit of a hang-out area for them in tokyo.

Some of them do it quite tastefully and look quite nice. This one, however, is not an attractive sight.

my god.

where are your PARENTS!!??

Link to comment
https://www.sau.com.au/forums/topic/126295-yamanba/#findComment-2332365
Share on other sites

its pathetic when you groups of these people sitting around doing nothing in the steets of shibuya. its also more pathetic to see just guys with the same hair color same ratty style who think they are tough and cool.. when they are just homosexuals people want to beat up. and lets not get start on the parra parra. .... some of the gyaru's are quite attractive sometimes though (similar style but no where near extreem)

Edited by akeenan
Link to comment
https://www.sau.com.au/forums/topic/126295-yamanba/#findComment-2332387
Share on other sites

pretty funny, really. Its wierd because some of them actually belive its attractive, and that it appeals to mens tastes. to some of them, yes. Like i said, some do it really well. most dont. Most do it just to be different.

They are the hardcore emo's of japan.

Link to comment
https://www.sau.com.au/forums/topic/126295-yamanba/#findComment-2332394
Share on other sites

"How do they go to the bathroom with all that shit on...?"

gallery_4816_41_13487.jpg

I think this 'Center guy' (thats what they call the male Yamanba) owns an AE86...

gallery_4816_41_275519.jpg

A spy shot of a group of Yamanba. I swear the one with the pink and yellow hair down the bottom looks like a psychadelic version of native American soldier 'Billy' from Predator...

Link to comment
https://www.sau.com.au/forums/topic/126295-yamanba/#findComment-2332851
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...