Jump to content
SAU Community

Recommended Posts

Does anyone know where the oil pressure sender is on the RB engine? specifically rb20det...

I know they play up on most skylines, and many other nissans such as 300zx

...I want to try to replace it to see if i can get my gauge working right ;)

Also, is an oil pressure sender a universal unit? or car specific?

You can always get a thread adaptor to make another one fit i think, but will it be sending the right values to hte gauge?

Or is there a replacement that works fine eg rb30e from R31 or VL? Or from another nissan eg maxima etc.?

Thanks for your help,

Warren

Link to comment
https://www.sau.com.au/forums/topic/126565-oil-pressure-sender-on-rb-engine/
Share on other sites

if i can get a replacement from VDO and get it to work, i might buy a few and sell them for the hundreds of ppl on here that would love their stock gauge to work :P

Hahaha good plan

But now we know who your supplier is

i mean sell them for the same price as i bought them to the hundreds of people on SAU that want to get theirs to work

i didn't men sell them for hundreds (as in dollars)

but if they are about $60 each, i might not be able to afford to make the outlay for many (am a student still!)

i mean sell them for the same price as i bought them to the hundreds of people on SAU that want to get theirs to work

i didn't men sell them for hundreds (as in dollars)

but if they are about $60 each, i might not be able to afford to make the outlay for many (am a student still!)

Oh, i see ;)

Just after I bought my R32 the oil guage dropped to zero.

I was so happy to find out it didn't need a rebuild I didn't mind forking out $250 for a genuine sender.

But they are known for being unreliable, and will just break again

or do you have a part number?

maybe its the same part number as the 300zx item in the above link.. then we can just get that VDO item!

$60 is a little bit cheaper than $250...

Yeah, if it works, and is THAT much cheaper, why not? Hell, a lot of people use 300zx afm's so why not use another part :P

OK bad news team.. VDO don't have a listing for the rb20det

BUT... not to despair just yet.. i think that's because they don't know what our original part is, rather than they don't have a replacement for our original part

i'm sure, as with everythign else, that these parts were used on many nissan models.

if i can get a part number, maybe i can find another car (eg 300zx or R31 skyline) that has the same unit and they might actually have a listing for that car.....

sav_man

do you have a part number for the nissan part?

or anyone else?

cheers,

Warren

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...