Jump to content
SAU Community

Fs: R200 Longnose 3.9:1 Lsd

Matty T
 Share

Recommended Posts

Matty T Collaborator

Matty T

Posted
Posted (edited)

For sale: longnose R200 3.9:1 LSD (10mm). No halfshafts.

Item Condition: Good. I haven't measured the preload on it, but would be surprised if it was much less than the factory 45 lb/ft. Car had 120,000 kms on it. Diff makes no noises.

Price: $1000

I am selling it because the ratio I am moving to uses the 12mm crownwheel bolts, and I can't bear the thought of drilling out the holes in the (rare) 10mm centre. I may as well sell the diff complete.

Contact Details: PM me, or e-mail matt at bmsc dot com dot au

Location: Canberra

Delivery & Conditions of Delivery: Pickup preferred, but will ship at the buyer's expense. R200's are weighty buggers, so roughly calculate the shipping on a 26 kg item.

Pics:

Diff_LSD%20002_small.jpg

Diff_LSD%20004_small.jpg

Diff_LSD%20006_small.jpg

Edited by Matty T
Link to comment
Share on other sites
  • 1 year later...
Matty T Collaborator

Matty T

Posted
  • Author
Posted

Sorry hr31, it was sold not long after the ad went up. I actually sold it for more than I asked for it! :P

What specifically are you looking for? It is an entire R200, the housing, just the LSD, or a crownwheel & pinion?

i no this is old but im chasing that diff lol how much u want for it now?
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • VooDoo34
      Sau A.c.t. - What Did You Do To Your Car Today?

      By VooDoo34 · Posted

      Looks clean as bro! very nice.
    • Neostead2000
      rb20de neo +t conversion - boost pressure sensor needed?

      By Neostead2000 · Posted

      Agreed with the rest. Also at least based on my own research, there are no readily available stock or close-to-stock RB20Neo maps that you could download and use as a base were you to buy a complete standalone ECU, and the regular 20DET maps don't really work well so you'd need to take it to a tuner if you have no experience. I installed an AEM V2 on my 20Neo+T and had lots of headaches until I got it to run and idle properly but I've yet to remap it fully. You have to start building up your timing and fuel maps entirely from the ground up; even the ones for a 25 didn't work at all.
    • klutched
      GOT SUM's RB34

      By klutched · Posted

      Got some decent progress after work yesterday and also today. Got the ECU all wired and passenger side interior all back together. Kept the wiring up nice and high to avoid people standing on it. Got the surge tank relays rewired and tidied up the pump wiring and cut a hole to bring the cables through.  I found a spare USB cable I had lying around so I decided to cut it up and see if I could use it for my CAN 1 bus. Turned out one of the pins I needed was to the shield of the cable so i cut it up and desoldered it and resoldered to the correct pins.  Had the issue with the powersteering hose hitting the A/C compressor and fan shroud. I pulled the bracket off and modified it to remove the front mounting point which now clears it all. Will keep an eye on it to see if theres any signs of fouling once it's up and running.
    • hardsteppa
      R32 OEM rims name?

      By hardsteppa · Posted

      That's some good input mate. Nice.
    • PranK
      My BMW 335i

      By PranK · Posted

      So today I went well outside my comfort zone (again) to replace my valve cover gasket.  I have had a big leak over the exhaust leading to a lot of smoke and smell every time I drove it. The leak was in the rear driver's corner.  The job wasn't hard as such, just a bit finicky and time consuming.  The old gasket was rock hard and broken right where the leak was.  The leaky corner had so much sitting oil in it.  The good news to my amateur eyes was no buildup or sludge under the cover. It all looked fairly nice in there.   I haven't started it yet. I ran out of light and body when putting the coils and injector loom back in. Probs only 30min left for the morning.  I was so nervous putting the cover back on, I must have lifted it 5 times to make sure the gasket was still seated properly. God it's going to be nice to be leak free and not make other traffic light queuers think my car is about to explode.
×
×
  • Create New...