Jump to content
SAU Community

Recommended Posts

if the sensor is not plugged in, then it wont flash.

it sounds like are getting mixed up.

are you seeing an orange flash or red one ?

turn your car to ACC, take of all the lights lit up, then post on here and circle which one you see flashing and coming on.

only the engine check light should flash

lastly you can check all yours sensors under ETC, SENSOR SW CHECK and look for any black highlighted sensors, these are ones that are not working

A better pic

YELLOW BOX = 4WD LIGHT RED

BLUE BOX = CAT TEMP LIGHT FLASHES RED

GREEN BOX = ENGINE CHECK LIGHT FLASHES RED

PURPLE BOX = DOOR OPEN LIGHT RED

Orignially the GREEN BOX engine check light was coming on as AFM was maxing out. Now BLUE BOX cat temp light is flashing instead.

post-26467-1153573268.jpg

Check the exh. temp sensor is ground properly.

Erm... are you sure you haven't got a tad mixed up which light flashes on the r32???

I have just checked mine and its always the cat temp light that flashes due to detonation or afm maxing out.

The light you state to be the green box (top right) on mine is actually a seat belt light that flashes on and off when you first turn the ignition on.

I don't actually appear to have a check engine light. :)

I'll take a pic in a few minutes and throw it up, maybe its moved around a tad on the rwd pos version. :)

My light that flashes is most definitely the bottom left light through. Which does appear to be the cat light.

My lights are layed out as followed..

Top left, NFI

Top right, seat belt warning

Bottom left, cat temp

Bottom right, door open warning

Not too sure where my check engine light is... I've never seen it come on.

post-382-1153575038.jpg

Check the exh. temp sensor is ground properly.

Erm... are you sure you haven't got a tad mixed up which light flashes on the r32???

I have just checked mine and its always the cat temp light that flashes due to detonation or afm maxing out.

The light you state to be the green box on mine is actually a seat belt light that flashes on and off when you first turn the ignition on.

I don't actually appear to have a check engine light. :)

I'll take a pic in a few minutes and throw it up.

Ok im not too sure joel what are you up to wanna come for a cruse and ill show you :)

Ok I believe it is a knock warning. I think you have some kind of knock warning level set in the PFC. You can change it with the datalogit software but it shouldn't display that exhaust temp light until knock of about 50 or 60.

I have a PFC and this exhaust temp light cam on on my GTR a short while ago. I have my knock sensor display constantly on the Commander and when the car is upto temp the knock is always lower than 30 (sometimes lower than 20). If my exhaust temp light is on because of the knock, I would assume its becuase on start up, my car hits 80-84 knock. This has happened since my Power FC install (presumably since I bought the car) and the temp light hasn't displayed on the dash until now.......

confused? :)

my cat light on my r32 gtr is just permenantly on no matter if the car iss tone cold, not that it matters as i have no cat, anyone explaine this?

edit

dont worry i fixed it, it seems that the boost control option was on in the power fc, when i turn it off the light goes away, so it seems r32 does use cat light as warning light for the fc.

Edited by GTR1993

Well i think i have it sorted now, the cat light is used as a warning light by the power fc on the r32's for injector max, afm max, and knock, obviously since i had the hand controller hooked up i could see it wasnt knock and the injectors where going to 100% duty so its either afm or injectors. I kind of got the lights mixed up as the cat light was flashing and i wasnt looking at it as i was concetrating on the road more then anything :) . So problem sorted thanks for the help guys!

Also dont use that 95 octane fuel it is just crap and can do some serious damage if your car is tunned for 98... :)

Well i think i have it sorted now, the cat light is used as a warning light by the power fc on the r32's for injector max, afm max, and knock, obviously since i had the hand controller hooked up i could see it wasnt knock and the injectors where going to 100% duty so its either afm or injectors. I kind of got the lights mixed up as the cat light was flashing and i wasnt looking at it as i was concetrating on the road more then anything :P . So problem sorted thanks for the help guys!

Also dont use that 95 octane fuel it is just crap and can do some serious damage if your car is tunned for 98... :)

And isn't it rather interesting how your injectors are 100% and your afm reads 5.115 volts yet only making 187rwkw or whatever it was. :(

Then you wonder why it completely reels past 210rwkw+ rb's. :)

Shauns dyno reads slightly lower. :)

thanks for clearing it up

so rx7 and r32 use exhaust cat temp light as their "engine check light" flash method. also for those interested ive added how to use low octane fuel with the powerfc if you get in a situation where you have to put in penis fuel, it tells you how

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...