Jump to content
SAU Community

Recommended Posts

hi guys..

I just purchased a turbo on the weekend off an RB25det.

my question is this..

the hose that goes from the wastegaste acutator diaphram.. where does it connect on the turbo?

On my standard RB20 turbo, it connects on the back of the compressor.

but I can't find where it is on the RB25 turbo.

Can anyone tell me?

or better yet, have a picture of it that they can point out?

thanks.

Link to comment
https://www.sau.com.au/forums/topic/12725-rb25det-turbo-question/
Share on other sites

I wasn't implying that you didn't know your car.

I had never seen that before is all.

so it doesn't connect to the compressor at all?

it goes directly from your wastegate acutator diaphram all the way up to near the throttle body?

and say when you want to connect a Bleed valve... you splice that line and connect it in there?

The wastegate hose connects to the pipe that comes out of the intercooler and goes into the inlet of the motor.

The actual position of the tee off feed off of the pipe is where the pipe is cloest to the turbo, so the lenght of the pipe is about 4-5 inches long.

They use this methoud on the R33's so it gives better boost stability over different conditions. So the R33's are less prone to drop boost on a hot day etc.

This is cause it measures the preasure after the intercooler - well, this is the theory anyway !!!

J

the watse gate actuator hose runs directly to the boost solenoid, which is controlled by the ECU in the 33's. The 32's are not controlled by the ecu, maximum boost is controlled by the waste gate spring tension. If ytou just plumb that hose to the presurised side of the turbo you'll only get around 3 lbs boost, as this is the default for limp mode. The solenoid controls boost by interupting pressure from the manifold to the waste gate actuator.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...