Jump to content
SAU Community

Recommended Posts

A few months ago i got my car tuned to 11 psi and got 205rwkw with an af/r of ~11. Now on a little more boost the car doesnt go at all like it has fuel cut out and the engine just jerks when it cuts out. I had my timing advanced and i have been told the standard ecu resets itsself when it exceeds 205rwkw. I am assuming my timing has gone back to zero. Under load on high boost it misses alot. Hits full boost approx 13 - 14psi at 3 - 4,000 rpm and after that it feels like nothing. just slow revving to 7,000 rpm.

If anyone can shed some light on this, it will be greatly appreciated.

Thanks, Phill [LTHLRB]

Edited by LTHLRB
Link to comment
https://www.sau.com.au/forums/topic/127452-tuning-out-of-wack/
Share on other sites

do you have a remap?

if YES

the ecu could be picking up excessive detonation and dropping to the low octane map

was the rich and retard protection removed/disabled/edit'ed to go away?

if NO

rich and retard is being activated due to the ecu seeing excessive airflow, ie: more than it is happy with dealing with, so it panics and protects itself, dumps the timing and richens itself up. a search will give you the answers you are looking for

it wasnt remapped. It was going fine for a while and i ran a 13.1 second pass at calder in full street trim. But after that it just died out. I think its retarding and getting very rich. Fuel economy is out the window. Engine isnt pinging or knocking though. Fuel delivery is fine. 500hp tomei pump is doing well. The car is going in tomorow to get tuned. Is there any way to remap the standard ecu's ?

well the dyno tuner is going to run through the afr's. Also re gap the plugs. Also get the right boost and check for pinging/knocking. Also advance timing to a safe but good level. Not much really you can do to a standard ecu. I just want it to last till nov/dec when i get my power fc :O

  • 4 weeks later...

like paulr33 said, too much boost made it dump the timing and richen itself up. The plugs were re gapped and pinging and knocking was checked. Ignition timing was advanced to a safe level. Made more power than last time on 11psi. Cant go much more than that or it will do the same thing over again.

like paulr33 said, too much boost made it dump the timing and richen itself up. The plugs were re gapped and pinging and knocking was checked. Ignition timing was advanced to a safe level. Made more power than last time on 11psi. Cant go much more than that or it will do the same thing over again.

out of interest how far did they advance the timing? i know stock is 15degrees advanced at 650rpm? is 20degrees advanced at 650rpm doable?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...