Jump to content
SAU Community

Recommended Posts

Yeah I can, but a few guys can get really good prices on RE540's, so wait to see who else responds.

True the 4WD helps at the plex, but they aren't desinged for drag racing, but one of the best for dry road and track, ask Ken what there like in the wet.

See'ya:burnout:

the 540's are a good compound. Get them in a taller profile for better sidewall flex and I'm sure they will prove to be an excellent choice for the drags.

35 profile is a little low 50/55's are better. also if you can match the rim width to tyre width thats the way to go for retaining some good handling (on that topic I'm sure gtrken is the guy to chat to).

Guest KILLER-T

Hi ya Brett if you are buyin the re540s for the drags then dont bother the side walls are way to hard to get any advantage from them on the 1/4 mile but for a track tyre they would be great.I cant tell you what they are like in the wet but on a dry road the are the best thing i have used.The only thing i dont like about them is the amount of road noise they make

but thats for drags, and you dont drive to work in 1/4 mile stretches. id go for an all-round tyre which performs on the street, if your keen on making good times at kwinana get a couple of stock rims with higher profile tyres

plus being 4WD you dont have to worry as much as us RWD guys cos traction is aided by atesa

Originally posted by EVL R33

Anybody using these tyres???  Comments on wear rates and performance in both wet and dry???

Oh,  anyone using Pirrelli PZero NERO's??  Comments??

Cheers

Brett

Its all i use now days on my car, using them for normal street punting feel a lot safer due to the extra grip..

anyway, as a track tyre, there fantastic, for the drags as everyone has pointed out, they arn't so flash, but if your serious about the drags, buy slicks, simple..

As for wear, how long is a piece of string, i usually get around 6 months a set, street driving and a pile of events, for normal street driving you'd probally get 20 thousand out of them, but it depends on how you treat them, and thew downside to street driving is with the heat cycles they get hard, my last set after there 6 month tour of duty where tops for drifting a 4wd, not so hot for grip when i wanted it..

So there not that good a daily if you want to hammer them at the same time..

usually a better idea to keep them on a second set of rims, and swap them over when you need them..

Originally posted by adam 32

but thats for drags, and you dont drive to work in 1/4 mile stretches. id go for an all-round tyre which performs on the street, if your keen on making good times at kwinana get a couple of stock rims with higher profile tyres

plus being 4WD you dont have to worry as much as us RWD guys cos traction is aided by atesa

The tyres I use at the drags are the ones I drive home on and do 35,000+kms on a year.

50 even 60 profile tyres are fine for going around corners on a street car. They offer even better ride comfort, something that is often needed when you have concrete coil overs.

There is bugger all radial roll on a good set of tyres like the re540s even at this profile.My old toyo proxes were 55's as well and had no radial roll at all.

To combat the hardening of the tyres from street use over time you can occasionally apply some AZNU tyre compound on race days (Ozrace stuff) get it from A1 performance I think.

so a 50-60 profile tyre is going to have enough sidewall stiffness when fully inflated that you can push hard through corners on the street and have decent handling (forget comfort) yet when de-pressurised can provide enough sidewall flex to launch well at the drags? seems a little too good to be true

instead of getting a tyre which will do both jobs in a mediocre fashion, if youre really that concerned with 1/4 times get a second pair of tyres. also as i mentioned before sidewall flex isnt as big a concern for 4WD cars compared to 2WD. i understand the sme principles of squatting down to gain max traction apply but less so with the attessa system in place.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...