Jump to content
SAU Community

.....wanted.....r33 Auto Trans

dangerman4

By dangerman4,
in South Australia

 Share

Recommended Posts

dangerman4 Mentor

dangerman4

Posted
  • Author
Posted
There was one going for a carton of beer a few weeks back, worth a search.

You could try somo of the wreckers, but make sure they know that an auto insnt worth much cash

that was for a r32 i think.

there not the same box are they?

my current box has been holding 270kws for a while now but im thinking of upgrading to a new gt3582r-iw when there released. I dont think the standard box will appreciate that much power, so i may as well get Mike to build a box properly including high stall etc, and have it ready to go.

dangerman4 Mentor

dangerman4

Posted
  • Author
Posted
i want 150 for it if i cant get that i will keep it for a spare for my 33

re401A i cant see a id tag on it but give me a clue and i will have another look for ya

theres a tag on the drivers side near where the output shaft housing bolts on to the trans.

about six inches from where the tailshaft goes in.

what does this tag say.

OZ_Pomy Rising Star

OZ_Pomy

Posted
Posted

ok had a look for a tag all over the box and cant seem to find one but i know the box come from a r32 as i helped pull it out i have a r33 and was going to keep it as a spare. they look the same as far as i can tell but maybe ring mike from mv auto to confirm if they are the same if so the one i have drove smooth and had around 70ks on it sorry i cant be more helpfull than this

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...