Jump to content
SAU Community

Problem With Water Pump (i Think)

Eav00l

By Eav00l,
in Engines & Forced Induction

 Share

Recommended Posts

Eav00l Proficient

Eav00l

Posted
Posted

OK, driving home the other day and i start hearing this noise, like a solid clicking really quickly.

I pulled over left the car running, popped the hood and this click noise was coming from the front, behind the radiator fan.

I turned the car off and the noise kept goign for about 20 seconds then went off.

I got a mate to look at it and he said it may be the water pump....

The car is off the road right now, i have borrowed a friends car for the mean time but trying to cut costs.

Thanks guys,

Craig

Link to comment
https://www.sau.com.au/forums/topic/128337-problem-with-water-pump-i-think/
Share on other sites
crack Mentor

crack

Posted
Posted

i don't think it would be the water pump if the engine was turned off. in fact the only thing that keeps moving, turning, etc. after power off is the turbo. just a thought. hope it helps.

just read the above post. could very well be the viscous clutch fan. blades may be touching something. shroud, radiator. do you have a fmic with pipes going near fan?

202.3rwkw Contributor

202.3rwkw

Posted
Posted

hi mate,

i would say there is a good chance that it is the viscous fan coupling or as u have said in the water pump assembly.

your best diagnosis method there would be too either place a solid plastic handled screw driver on the water pump assembly (NO WHERE NEAR ANY ROTATING PART) and listen for bearing noises or anything out of the ordinary.

failing that i would remove the fan assembly and reattached the retaining nuts and start it up and see if the noise is still present.

hope that helps

glenn

202.3rwkw Contributor

202.3rwkw

Posted
Posted
cheers ill try that glenn.

Dont suppose anyone has a teardown manual for an r33 gtst?

[email protected]

you dont need one. it is just four 10mm nuts holding the fan on. you shouldn't even need to remove shroud.

just undo those and rock the fan gently off its seat. be very careful when putting it back on that all nuts are done up in a "cross" pattern to achieve even seat pressure. have fun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...