Jump to content
SAU Community

Recommended Posts

Hi terry call captain thread on 0407077414 he will remove it for you. Tell him FOOLBOOST says hi :P

Excellent, thanks mate. Do you know how much $$$ roughly?

Do you know if this causes any boost issues?

if you're lucky, that exhaust port will still seal and there will be no change.

otherwise yes, of course.. you will get an exhaust leak which means there is less gas available to drive the turbo and your car won't boost as quickly.

The stud breaks because the leak was already there or because of an oil leak over the stud in question. So to answer your question - yes it will cause boost issues.....it will also effect air/fuel ratio readings. If one stud is broken you will be looking at around 4 -5 hours but the thread guy will not remove the turbo and manifold for you...you'll have to do it yourself or get someone else to do it.

just done mine lol worksshops charge 50 or more per stud to fix plus gaskets lol and so on..

i done myself they suck,,need small air drill if have some snapped of...

replace all of them if doing not worth doin 1 or 2

goodluck

captain thread is the MAN!!! he has gotten mine out twice, when i broke an easy out stud extractor off in the broken stud aswell...

cost a bit over a hundred $$ EACH. but i was so frustrated i had no other avenue. He has a mobile service which is very handy

VOTE 1 CAPTAIN THREAD

ive had this same problem, and now i got an oil leak from the head behind the stud.. i called a thread proffesional to fix it, and its still leaking, is there anything i can use to seal this leak properly? rather then replacing the whole head?

i've heard of exhuast studs breaking on many skylines. it was probably a techline in japan

they break because the inline-6 manifold is long, and has a turbo hanging off it. the weight and flexing from repeated heat cycling gradually fatigues the studs.

I had at least 3 snapped studs when I pulled the manifold off my R31 (was upgrading the turbo and figured I should do the studs while it was apart). I didn't suffer from any exhaust leaks either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...