Jump to content
SAU Community

Cat Converter 2.5 Inch

AlexR34

By AlexR34,
in Queensland

 Share

Recommended Posts

17SOK Collaborator

17SOK

Posted
Posted

Have a look in 'group buys' - there was a deal in there for Catco cats recently. Send him a pm and you may still be able to get one for the GB price (around the high 300 dollar mark If I remember correctly)

From what I hear they are very good... Will most likely purchase one myself :laugh:

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
I swear I told you this in some other thread?? Anyway...stock GTR cats are very good and are 2.5 inch...the really good news is they bolt up and cost under $100

Yes where do i get one

AlexR34 Proficient

AlexR34

Posted
  • Author
Posted
I would look up the yellow pages and find compliance places...Like maybe try SVI they could point you in the right direction probably

Thats to much work, i started uni again and am working i dont have time to go chasing around for second hand parts

DOU33 Proficient

DOU33

Posted
Posted

ok, so you said your too busy to go looking for parts, but you are asking where you can get one, dude they gave you advice on what to do, take Buntas advice on the GTR cat, it will take u just as much time to make a few phone calls and pick one up as it probally will to get one any other way,

or ask your genie if he knows where you can get one and he might do the running around for u,

Bunta Grand Master

Bunta

Posted
Posted
I know thats why im asking if anyone know where i can get a good price on any 2.5 inch high flow cat.

Dont be so lazy! Even if someone tells you exactly where to go you should still ring around a bit and make sure that you are infact getting a good price! Research prevents you getting ripped off

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...