Jump to content
SAU Community

Recommended Posts

post-3771-1154686235.jpg post-3771-1154686953.jpg

After 5 great years it's time to move on to the "family" car

I have owned the car since 2001, during this time i have spent alot of cash on the car from basic tuning, major servicing, rims and tyres, boost controller, pod filter etc

Paint is in immac. condition and the engine is one of the smoothest rb20's you will ever ride in.

Features

Lowered

Cat back Exhaust

Pod Filter

18 Inch Niche chrome rims with 90% rubber.

Sports steering wheel and G Knob

Cd Player & Upgraded speakers

G Reddy Turbo Timer/ Boost Gauge

Boost Gauge pillar mounted

Window Tint.

Overall one of the nicest r32's you will find. $14,000 now $12,990Give me a call for more info

0413 24 2255

Edited by DRAGTS
Link to comment
https://www.sau.com.au/forums/topic/128873-sold/
Share on other sites

post-3771-1154686235.jpg post-3771-1154686953.jpg

After 5 great years it's time to move on to the "family" car

I have owned the car since 2001, during this time i have spent alot of cash on the car from basic tuning, major servicing, rims and tyres, boost controller, pod filter etc

Paint is in immac. condition and the engine is one of the smoothest rb20's you will ever ride in.

Features

Lowered

Cat back Exhaust

Pod Filter

18 Inch Niche chrome rims with 90% rubber.

Sports steering wheel and G Knob

Cd Player & Upgraded speakers

G Reddy Turbo Timer/ Boost Gauge

Boost Gauge pillar mounted

Window Tint.

Overall one of the nicest r32's you will find. $14,000

Give me a call for more info

0413 24 2255

Hi there:wave:

what year is the car ? Is it 1989 or 1992 and just wondering whats the difference between the different year makes? Thanks

Link to comment
https://www.sau.com.au/forums/topic/128873-sold/#findComment-2387278
Share on other sites

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
    • Ceste, jak se mas Marek...sorry I only have english keyboard. Are you a fan of Poland's greatest band ever?   
×
×
  • Create New...