Jump to content
SAU Community

Recommended Posts

car was defected while a mate was driving and i have since taken it to have the defect cleared, basically was a major defect to be cleared by authorised blue slip place. any ways was for blow off valve, pod, inside of tyres being warn, and also check that exhaust complies to adr standards or whatever - check is not louder then 90dB and car to have full pit inspection, any way i took it to have the exhaust level checked, then took it to a blue slip place they said they were too busy directed it to some body else, the guy i took it to said even tho my exhaust was only 86.3dB he wouldnt clear it because its not standard he said i have to have an engineer check my emissions and do a thingy for me, any way i reckon its a bit bullshit, any one done this before, if the copper wanted my emissions tested would i have not been sent to epa? im yet to take it to another place for a second opinion

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/
Share on other sites

they usually send the EPA letter a week or so later. you'll probably get that soon.

as long as your car checked out to be under 90db and you had proof of that when you went to get the blue slip, then there was no reason for them not to pass you.

all you need to do is comply with the standard, not be standard. you might need to explain that part to them.

also, if you get the EPA letter i suggest clearing that before going for the blue slip.

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2386390
Share on other sites

A lot of places won't pass an exhaust on a defected car, as it can come back to haunt them. A vehicle really does need to be engineered if it has any modification which can change its emissions.

Having said that, you shouldn't have too many problems passing emissions as long as you have a working cat converter.

The advantage of having an engineers certificate, combined with legal modifications, is that when you get pulled over, you have absolutely nothing to worry about.

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2398104
Share on other sites

A lot of places won't pass an exhaust on a defected car, as it can come back to haunt them. A vehicle really does need to be engineered if it has any modification which can change its emissions.

Having said that, you shouldn't have too many problems passing emissions as long as you have a working cat converter.

The advantage of having an engineers certificate, combined with legal modifications, is that when you get pulled over, you have absolutely nothing to worry about.

any ideas on a good engineer who dosnt cost to much?

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2398958
Share on other sites

Hey PM me and I can get the bluey done for $100 my mate wont even really be looking at it ok, he is at Cherrybrook area, as long as it looks decent you will be fine, Ill just have to organise a day when i can take you down there if your interested???

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2400823
Share on other sites

wow, she came through.. Well done Jayla.. Nemz was telling me how mad you were.. Cheers

Well of course I came through did you expect differently???

Nemz owes me big time lol I went to alot of trouble to help him :0) just joking...

Anytime Nemz your cool...

Link to comment
https://www.sau.com.au/forums/topic/129013-defect/#findComment-2423699
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
    • You'd really have to pull it apart further to know, it least you can be confident that the one heading to the back is not connected any more. There was once a ground on the shifter seal mount too, your head unit issue could be that simple
    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
×
×
  • Create New...