Jump to content
SAU Community

Recommended Posts

Ummm... I think he said 5w50.

Which is what I use, over filled (to the bottom of the bump on the stick) ofcourse.

I think 10w30 would break down too early in an RB turbo engine (engine gets too hot for that oil).

Sorry yes 5W50. Same thing really. Still nice and thick.

The M1 10W30 won't break down in an RB. Its fully synthetic PAO based oil so it can handle the stress without breaking a sweat. Hell Nissan's OEM oil is 7.5W30 mineral stuff so if that can do the job...

Your average RB doesnt run any hotter than any other engine, why would you say that? The turbo is water cooled anyway so the turbo isn't as hard on the oil as the days of old.

Guest 40th-edition

i run 10w30 because i get it from work.. does the job and have no probs with it at all..

the numbers given to the weights of the oils r over rated ne ways... 50 is a large cold weight and 0 is just bull shit.. just oil componeys claming crap ( i know they go through sia testing)

i run 10w30 because i get it from work.. does the job and have no probs with it at all..

the numbers given to the weights of the oils r over rated ne ways... 50 is a large cold weight and 0 is just bull shit.. just oil componeys claming crap ( i know they go through sia testing)

50 is not the cold weight. It is the measure of the high temperature viscosity.

As for the numbers being crap, it is easy to compare the difference between two grades. Just tip some out of the bottle - it will suprise you how different they are.

Essentially, to compare the 5W50 to the 10W30 they are basically the same oil, just with different viscosity modfiers. The 5W50 will be "thinner' when cold & "thicker" when hot. This is a relative thing as obviously the oil's viscosity will decrease as it gets hotter.

At the end of the day you will be marginally better off with the 5W50 because it is more stable, most noticeably when hot.

is it 5W50, or 5W30? cause 5W50 sounds like a pretty thick oil to me.

its definitley 5w-50.... but u can buy 10w-30 aswell....

when is oil at its thickest? i never drive my car for longer than 50 mins at a time, i dont go on long trips.... so what would be better for me?

im only ever doing little trips to work and stuff... never big road trips..

Beef

whether you drive for 20 mins or 5 hours, once the car car has come up to operating temp the oil temp shouldn't rise (unless you are flogging it). normal oil gets thinner as it got hot, but multigrade oils are designed so they don't thin as much.

Edited by mad082

just doing a bit of research, normally oil thins at higher temp. multi-grade oils have polymers that stop it hinning too much (so its thin when cold, and not too thin when hot). the dissadvantage with high range oils (big gap between 1st and 2nd numbers) is that they are more prone to breaking down. it is the oil that lubricates, not the additives, so the less additives, the better.

Hi Guys,

There was mention above of filling oil past the MAX to the BUMP. I was told by one mechanic that this reduces the change of oil surge and is ok but by another mechnic that filling past MAX on the dipstick can cause potential damage. Can I get some sort of common consensus on whether this is ok?

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...