Jump to content
SAU Community

Recommended Posts

Hey guys just wondering when it comes to tuning the power fc will i require a wideband 02 sensor or will a 4 wire one do the job.... Like this one?

http://www.tweakit.net/shop/product_info.php?products_id=81

(will it fit r33 gtst?)

or will even the stock o2 sensor do?

Any ideas comments welcome.... do not have a clue when it comes to these o2 sensors and seems that they are hard to find even on the net.

Cheers

You need a wideband to tune the PowerFC. The "4 wire" O2 sensors are the narrowband type, just with an inbuilt heating element. Totally useless for tuning for anything but stoichiometric AFRs.

You need a wideband to tune the PowerFC. The "4 wire" O2 sensors are the narrowband type, just with an inbuilt heating element. Totally useless for tuning for anything but stoichiometric AFRs.

ok so does this mean that everyone that has had a power fc tuned needed to get an o2 sensor b4 they could get the tune?

anyone know where i can get a wideband from?

Edited by bygrave316
No. Noone has to get a wideband. Just take it to a tuner and he does all the tuning with his wideband. Done.

ok.... now i get it.... so they just remove yours and put in one of those ones connected to a meter.

ok so what would be the adavntage of replacing my old one with a 4 wire one? better if i was to hook up an air fuel gague or something?

let me clarify. when they tune your car they stick one up the exhaust pipe at the back and use a portable controller and guage to read and then tune your car. they keep the stock narrowband sensor in the exhaust dump pipe. they tune the car accordingly and then remove it when done. theres no need to replace your factory narrowband one unless it is broken and doesn't return anything useful. they have a lifespan of around 50,000k's ish. so it might be worthwhile just replacing it anyway. the stock 33 gtst sensor is a generic 3 wire sensor and you can use a ford el falcon sensor as its the same type and setup.

let me clarify. when they tune your car they stick one up the exhaust pipe at the back and use a portable controller and guage to read and then tune your car. they keep the stock narrowband sensor in the exhaust dump pipe. they tune the car accordingly and then remove it when done. theres no need to replace your factory narrowband one unless it is broken and doesn't return anything useful. they have a lifespan of around 50,000k's ish. so it might be worthwhile just replacing it anyway. the stock 33 gtst sensor is a generic 3 wire sensor and you can use a ford el falcon sensor as its the same type and setup.

ok so what is the benifit of getting a 4 wire one? or is there no benifit?

i wouldnt think there is one at all. im not even sure it would work with the stock ecu or powerfc being a different sensor type. and dont bother getting an af guage off the stock narrowband sensor it will be pointless and given you nothing useful

i wouldnt think there is one at all. im not even sure it would work with the stock ecu or powerfc being a different sensor type. and dont bother getting an af guage off the stock narrowband sensor it will be pointless and given you nothing useful

ok thanks for clearing it all up for me.... for a second there i was thinking i was going to have to go spend more $$$ on an o2 sensor

chears

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...