Jump to content
SAU Community

Polished Simmons Fr18s *SOLD*

Shell
 Share

Recommended Posts

Shell Grand Master

Shell

Posted
Posted

POLISHED SIMMONS FR18s

These wheels are in awesome condition and have near new rubber (90%) on the rears (265/35) - not so good on the fronts (235/40) because of a dodgy wheel alignment they have uneven wear.

Fronts are 8.5" wide, Offset 33mm and rears are 9.5" wide, Offset 35mm. PCD 114.3

Tyres are Falken ZE 326's.

These rims will fit AU-BA Falcons (may need spacers for Brembos), and before the GT they were on a S14 so they will definately fit them as well as S15. They should fit Skylines and other 5 stud Nissans with no troubles.

Postage can be arranged and I'd say would be around $140 for courier to the eastern states, or pick up is available. They are located in Canberra.

Asking around $1,800 negotiable.

Email Damien: d.lewis at paragonprint.com.au

or send me a PM

127_2782.jpg

127_2784.jpg

post-57-1155039927.jpg

Link to comment
https://www.sau.com.au/forums/topic/129274-polished-simmons-fr18s-sold/
Share on other sites
Shell Grand Master

Shell

Posted
  • Author
Posted

hey,

no sorry - have already sold them for $1800 on ebay, but if that falls through I have had another offer for the full price as well, thanks for the offer though :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...