Jump to content
SAU Community

Recommended Posts

I know this topic has been heavily discussed before, but I couldnt help noticing that a great number of you have sydney kid suspension on your wish list of future mods....can someone please tell me what make/brand these are? adjustables or lowered springs on aftermarket shocks?

I dont know what suspension components are installed on my rs4, came lowered from japan...but currently it rides like a brick....not really ideal if you're crusing on a full stomach.

Link to comment
https://www.sau.com.au/forums/topic/129328-suspension-upgrade/
Share on other sites

http://www.skylinesaustralia.com/forums/in...showtopic=53079

simple, Sydneykids specs involving Bilstein shocks and Whiteline components (springs, bushes, swaybars etc). I went without the springs (using standard) and find it a most suitable ride.

edit: to lower it or raise the suspension, SK had "notches" scrapped into the shocks, and you can adjust the height simply using circlips. pretty much they are lowered springs on aftermarket shocks

Edited by Tangles
http://www.skylinesaustralia.com/forums/in...showtopic=53079

simple, Sydneykids specs involving Bilstein shocks and Whiteline components (springs, bushes, swaybars etc). I went without the springs (using standard) and find it a most suitable ride.

edit: to lower it or raise the suspension, SK had "notches" scrapped into the shocks, and you can adjust the height simply using circlips. pretty much they are lowered springs on aftermarket shocks

Sorry to steal the thread but it seemed like a logical place to ask...

What colour should the bilstein rear shocks be?

The ones in pictures I've seen are yellow whereas I've had mine replaced under dealer warranty some time ago and was told they were bilsteins, yet they are black. They are definitely new though and provide a very comfortable ride.

Sorry to steal the thread but it seemed like a logical place to ask...

What colour should the bilstein rear shocks be?

The ones in pictures I've seen are yellow whereas I've had mine replaced under dealer warranty some time ago and was told they were bilsteins, yet they are black. They are definitely new though and provide a very comfortable ride.

Genuine Bilstein shocks have "BILSTEIN" machine into the shock body along with the part numbers. Thye are usually down near the lower shock mount.

:devil: cheers :down:

http://www.skylinesaustralia.com/forums/in...showtopic=53079

simple, Sydneykids specs involving Bilstein shocks and Whiteline components (springs, bushes, swaybars etc). I went without the springs (using standard) and find it a most suitable ride.

edit: to lower it or raise the suspension, SK had "notches" scrapped into the shocks, and you can adjust the height simply using circlips. pretty much they are lowered springs on aftermarket shocks

wouldn't cutting threads into the shock body compromise the strenght of the overall assembly?

wouldn't cutting threads into the shock body compromise the strenght of the overall assembly?

Nope, Bilstein Skyline shocks come with circlip grooves standard, the Group Buy simply adds a few more. The shock body is designed for that purpose.

:wave: cheers :D

Edited by Sydneykid

Well seeing as though we are asking questions in here, and I dont want to muddy up the ongoing thread....

Can someone explain to me this approx 10mm rake effect... From what I can deduce if you wanted a 10mm rake effect for the nose down... wouldnt you then want the distance from the centre of the wheels to the wheel arch on the front to be 10mm less then the distance on the back wheels? I find it confusing because everywhere I am reading of this nose down rake effect and the measurement are always higher on the front and not the back...

Please help a poor confused man :wave:

Well seeing as though we are asking questions in here, and I dont want to muddy up the ongoing thread....

Can someone explain to me this approx 10mm rake effect... From what I can deduce if you wanted a 10mm rake effect for the nose down... wouldnt you then want the distance from the centre of the wheels to the wheel arch on the front to be 10mm less then the distance on the back wheels? I find it confusing because everywhere I am reading of this nose down rake effect and the measurement are always higher on the front and not the bad...

Please help a poor confused man :wave:

The front and rear guards openings are not "cut" to the same height. The rear guard opening is in fact ~15 mm lower than the front guard opening.

Hence, rake is best measured at the sill (just behind the front wheels and just in front of the rear wheels), that's where the 10 mm nose down comes from.

:D cheers :(

Thanks sydneykid. I'll email you when its time to change the shockies on my car. right now i'm saving up for a FMIC and SAFC (will have to do this on the sly coz my wife has a tight grip on finances at the moment)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...