Jump to content
SAU Community

Recommended Posts

Hey people,

My brother is looking at getting a dr30 HT2000 RS which has a bit of work done to it including; bigger camshafts, upgraded high comp pistons, front strutt bar, R200 LSD diff, etc.. with a FJ20de.

Gererally what are these cars like handling and reliabilty wise?

Are there any common problems to look out for?

And what price range do they go for roughly?

Are aftermarket parts readily available for them, like coilovers etc..?

Before we go look at it I wanted to find out a bit of info on them, so anything you can share will be appreciated.

Thanks in advance.

tpp.

Link to comment
https://www.sau.com.au/forums/topic/129722-advice-on-buying-a-dr30/
Share on other sites

firstly the r200 LSD is the standard diff....

you have to remember they are a 20+ year old car now, look for the general things first, rust in the wheel arches, window lips and the boot...

if its a 2door then check the rubber seals between the windows, major hassel to replace...

Price can very depending on year, condition, non turbo/turbo version 2/4 door, its realy what your willing to pay..

parts are a mixture of easy and very hard to get...

after market parts... engine wise not hard as you have places like www.fj20.com and datsun clubs who love the FJ.. suspension is another thing, custom or imported for coilovers $$$ or you can convert to s-13 for around 2/3s the price of imported or customs..

hope thats a help..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...