Jump to content
SAU Community

Recommended Posts

Hey all

This is just a EOI at the moment. Had a thought and want to see what people think!

I wish to see if anyone would be willing to basically swap their Stock standard R34 GTR for my 2000 Subaru WRX Club Spec Evo4 and Nissan Sil80. Info on both cars below!!

SUBARU WRX CLUB SPEC EVO4

wrxfrontnc7.jpg

wrxenginerm0.jpg

wrxslottedbrakesiw9.jpg

2000 Subaru Wrx Club Spec Evo4, Club Spec Yellow, 93000km, Power Steering, Power Windows, Power Mirrors, A/C, Lowered, Front & Rear Strut Braces, Slotted Front & Rear Brake Rotors With New Pads, CD/R-CD/RW, Owned By Young Working Professional, No Engine Mods except for JUN BL rear muffler to give it that unbeatable boxer sound, Never Been Boosted, Extreamly Neat & Tidy Inside & Out, Fantastic Car, Serviced every 5000km at S&J in Adelaide, Car Also Comes With Books.

NISSAN SIL80 (Original)

61d7c24d589244f79a6b695599fd8eb31mcy7.th.jpg

1994 Nissan Sil80, SR20DET blacktop, 92000km, Re-sprayed in white with black roof, full BN body kit, 18 inch white Kamimoto Motor Sport light weight Japanese racing rims, Brand new Nankang tyres, GT Wing, Type X rear lights, Bonnet vent onto pod filter, Full 3inch RSR turbo back exhaust, 550cc Injectors, Custom GTR front mount intercooler, Tein HR coil overs with height / damper / camber adjustable, Custom stainless steel cold air induction, Blitz pod filter, Stainless steel exhaust manifold, Garret T28 Ball Bearing Turbo, 500HP Walbro fuel pump, Front strut bar, HKS super sequential blow off valve, Platinum spark plugs, Apexi Power FC with hand controller, Apexi AVC-R Boost controller set at 1.2Bar (17PSI), Auto Meter Cobolt boost gauge and air / fuel gage flush mounted in dash, Full under car LED neon’s, Recaro drivers bucket seat, Momo steering wheel, Painted white dash and center consol to match car.

I was building this car as a show car but have decided to let her go! Was my pride and joy! A lot of money has gone into making this car, around $30,000,00 at least, Car was in the 2005 AUTOSALON.

Car made 209RWKW on 14PSI ( have dyno sheet to prove ) and this was be for the stainless exhaust manifold was added and raised the boost a little so would have to say it would be making around 225RWKW on 1.2 bar (17PSI)

Im located in Adelaide

If anyone wants to discuss anything PM me or call me on 0433 549 430

This is just an EOI at the moment

Edited by stylz7

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...