Jump to content
SAU Community

Recommended Posts

My current rear tyres have now had it & looking into some new ones. I currently run Sumitomo HTR Z-II 17"*275*40.

Looking at the wear, the inner 70% of each tyre is worn more compared to the outer side.

I'm just wondering why this would be. Could it be the fact i have a locked diff & when turning / cornering the wear is forced into the inside?

Thanks,

:happy:

PS: Think I'm going to get some Ventus K104's 275/40ZR17Y

Link to comment
https://www.sau.com.au/forums/topic/130348-inner-tyre-wear-question/
Share on other sites

nothing wrong with camber :D, but it could also be incorrect toe.. you should definetely look at getting an alignment done, and make a habit of rotating your tires...and yeah they'll be able to adjust your camber and fix your toe as well. but if you're really tucking your rears, you might need a camber kit otherwise they won't have enough adjustment to really fix your camber angle.

with me, my rear had too much negative camber only (toe was fine), but for the front the toe needed adjustment (camber wasn't too bad)

my guess is on camber for the rear...proabably time for a camber kit as the std camber adjustment for the rear isn't a whole lot...

Measure the ride height, centre of wheel to guard, that is a good indicator of excessive camber.

For the Group Buy camber kits, this is what is usually needed for each height increment, note that all measurements are centre of wheel to guard;

Standard (new) height is 380 mm front and 370 mm rear

360/350 mm needs only the standard rear camber adjusters

350/340 mm needs 1 front camber kit and 1 rear camber kit

340/330 mm needs I front camber kit and 2 rear camber kits

:) cheers :woot:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...